Notifications
Clear all

M3s rebooting loading gcode  

  RSS
xt550
(@xt550)
Active Member
M3s rebooting loading gcode

hi.

after having some problem with nozzle and fist layer i changed to a 0,6 nozzle and increased first layer temp by 10C  but now i cant load any gcode the printer reboots after some seconds loading.

Im trying to build a IKEA lack  with Prusa .STL files, and even tryed to print thing by thing with same result.

Have the latest firmware, tryed 3 different SD cards; reformated it

Posted : 01/06/2019 4:55 am
xt550
(@xt550)
Active Member
Topic starter answered:
RE: M3s rebooting loading gcode

And Prusa Slicer 2

Posted : 01/06/2019 6:01 am
xt550
(@xt550)
Active Member
Topic starter answered:
RE: M3s rebooting loading gcode

after runing the calibration again it sems to work agan

Posted : 07/06/2019 6:32 am
Vojtěch
(@vojtech-3)
Honorable Member
RE: M3s rebooting loading gcode

My guess would be that the extruder heater wires got shorted to each other when you were replacing the nozzle. They are not insulated right next to the heater and you may have moved them so that they were touching. Eventually, they could have spread a little again, but I'd suggest checking them so that you don't have any nasty surprises in the future.

Posted : 07/06/2019 9:00 am
Share: