Issues with new firmware, need to print using old firmware
 
Notifications
Clear all

Issues with new firmware, need to print using old firmware  

  RSS
UA3DP
(@ua3dp)
New Member
Issues with new firmware, need to print using old firmware

Hello,

I need to know the settings in the slicer to print using my current firmware instead of updating to 3.10.x

I can't update my firmware at this time and just need to print but after slicing and plugging in SD care I get a reminder to update and I can't print. How can I just get the file I have printed?

 

Best Answer by JoanTabb:

if you open the Printer Settings, Custom Gcode, Start Gcode section, there will be an M115 line, 

delete that line, or comment it out, and the printer will not check firmware levels.

Posted : 19/01/2022 5:24 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: Issues with new firmware, need to print using old firmware

if you open the Printer Settings, Custom Gcode, Start Gcode section, there will be an M115 line, 

delete that line, or comment it out, and the printer will not check firmware levels.

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Posted : 19/01/2022 9:22 pm
UA3DP liked
JustMe3D
(@justme3d)
Honorable Member
RE: Issues with new firmware, need to print using old firmware

News to me that the reminder on the printer screen now blocks you from printing. When was that introduced? I usually click it away until I have time or interest to update.

I try to give answers to the best of my ability, but I am not a 3D printing pro by any means, and anything you do you do at your own risk. BTW: I have no food for…

Posted : 19/01/2022 9:56 pm
towlerg
(@towlerg)
Noble Member
RE: Issues with new firmware, need to print using old firmware

Seems pretty handy, pity no option to print anyway.

Posted : 20/01/2022 12:20 pm
Share: