Notifications
Clear all

FIRMWARE UPDATE tip sizes in HW SETUP  

  RSS
DZ
 DZ
(@dz)
New Member
FIRMWARE UPDATE tip sizes in HW SETUP

I read that the firmware update 3.9.3- was supposed to have support for .25, .4, .6 and .8 mm hot ends I don't have  .8  is there another update coming soon? when is 1 mm support coming? I print heavy-duty often.

Posted : 10/04/2021 7:29 am
fuchsr
(@fuchsr)
Noble Member
RE: FIRMWARE UPDATE tip sizes in HW SETUP

0.8 is coming in 3.10. I don't see 1.0mm.

You can of course print any nozzle size, just ignore the warning. It's purely cosmetic. 

Posted : 10/04/2021 12:37 pm
bobstro
(@bobstro)
Illustrious Member
RE: FIRMWARE UPDATE tip sizes in HW SETUP

I've printed with 0.15-1.5mm nozzles on my Mk3 for years. Those settings are just warnings and I disable them. I'm the only user of my printer and don't have issues tracking the mounted nozzle size. Notes on nozzles here.

My notes and disclaimers on 3D printing and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan...
Posted : 10/04/2021 2:27 pm
Share: