Error: MINTEMP fixed  

  RSS
danieldanielnova
(@danieldanielnova)
Active Member

Hey guys,

So I am confused why my printer is giving this error. On initial research, it seems that it could be due to a cold draft etc. However I am printing ABS and the entire printer has been enclosed in a photo cube and successfully printing ABS in the same filament for a few days already in a row.

Here is a youtube clip I took of the error etc, trying to print the parts for a "real" Plexiglas enclosure ironically currently:

Thanks for any input. Trying to start part 3/11 and got a ways to go on these enclosure parts.

Daniel 

Posted : 02/11/2019 6:58 am
danieldanielnova
(@danieldanielnova)
Active Member

Here is the link I found on the subject: https://help.prusa3d.com/article/am4dykf2rw-mintemp

Posted : 02/11/2019 7:26 am
danieldanielnova
(@danieldanielnova)
Active Member

Hi,

So not sure specifically what was wrong. But just tugged and wiggled the wiring harnesses a few times then repeatedly tried to reprint. And eventually the error stopped coming up during the print. Not sure how permanant this solution is but hopefully it can help someone!

Posted : 04/11/2019 2:12 am
danieldanielnova
(@danieldanielnova)
Active Member

Here is a more detailed video of the actual wire wiggling causing the disconnect:

Posted : 04/11/2019 10:02 pm
Share:

Please Login or Register