Notifications
Clear all

Change in temperature behaviour and LOTS of stringing  

  RSS
jurikles
(@jurikles)
New Member
Change in temperature behaviour and LOTS of stringing

Hey guys,

I recently experience a LOT of stringing with PETG and PLA/Wood Filaments on my MK3S.

Simultaneously, I got Hotend Temperature Runaway errors on the settings that worked perfectly for a year beforehand. I had to change the cooling setting down to 30% from originally 50%.

In order to now get halfway acceptable PETG prints I had to reduce the hotend temperature down from 225° to 200°, and the results are still far from satisfying. However, PLA still prints almost perfectly at only 190°.

I have adjusted and reset all the slicer settings and printed a lot of benchmark parts, and even still my prints are still unsatisfying.

I use no Z-Hop and standard settings.

I am starting to become frustrated, do you have any idea what to look for? I thought of cleaning the nozzle, however PLA still prints fine.

 

Thanks in advance

Posted : 31/05/2020 2:54 pm
Share: