Notifications
Clear all

Boot stuck on bootloader  

  RSS
CovertPluto3502
(@covertpluto3502-2)
Trusted Member
Boot stuck on bootloader

So the other day I turned off the printer for a few days, and tonight when I started it, it was stuck on the first screen at boot. Looks like the firmware has problem loading or the bootloader has problems. Has anyone experienced this and how did you solve it?

FW: 3.9.1 (also tried 3.9.2)

Posted : 10/12/2020 9:00 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Boot stuck on bootloader
Posted by: @covertpluto3502-2

So the other day I turned off the printer for a few days, and tonight when I started it, it was stuck on the first screen at boot. Looks like the firmware has problem loading or the bootloader has problems. Has anyone experienced this and how did you solve it?

FW: 3.9.1 (also tried 3.9.2)

If the printer doesn't want to work anymore, I would do a factory reset and reflash the fw as a first step. Often this helps.

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen....
Posted : 10/12/2020 10:57 pm
towlerg
(@towlerg)
Noble Member
RE: Boot stuck on bootloader

Did you power cycle after the last firmware upgrade?

Posted : 11/12/2020 12:58 pm
Share: