Notifications
Clear all

Ship Date Tracking Spreadsheet  

Page 34 / 88
  RSS
dwtyra
(@dwtyra)
Active Member
Re: Ship Date Tracking Spreadsheet

Ordered 10/208, received printer kit today, 2/01

Posted : 02/02/2018 1:53 am
JustJustice
(@justjustice)
New Member
Re: Ship Date Tracking Spreadsheet


Ok I had to post this....... this morning I received the "shipping label created" email..... 6 hrs later I get the your printer has shipped notification.... and it’s already hit koln Germany. Must be mu lucky day.

Week 45, ordered Nov 6.

Don't get too excited because mine has been sitting in Koeln since the 30th. UPS tracking say's it never made it on the plane.

Posted : 02/02/2018 4:31 pm
Sean
 Sean
(@sean-7)
Trusted Member
Re: Ship Date Tracking Spreadsheet

It looks like they are starting to get a few days ahead of their shipping estimate right?

Posted : 02/02/2018 5:05 pm
Kwaad2
(@kwaad2)
Honorable Member
Re: Ship Date Tracking Spreadsheet


It looks like they are starting to get a few days ahead of their shipping estimate right?

Technically speaking, according to their schedule they are... but...

Mine was supposed to ship on the 5th according to original estimates.

They just shipped out november 7th and 8th (ish) today. For them to meet their current as of mid-january prediction which has since changed...
they would need to ship November 9th, 10th, 11th, 12th, 13th, 14th, 15th, 16th, 17th, 18th, 19th, 20th, 21st, 22nd, 23rd, 24th, 25th, 26th, 27th, 28th, 29th, 30th... and December 1st....
Over the weekend and into monday.

Soooo... I'm not complaining... but I wouldn't call them "ahead of schedule". 🙂

They only delayed me a week, and they are ahead of their new schedule, so I'm hoping my printer ships next week still!

Hi, I'm Sean. I used to work on CNC machines.
I try to not make mistakes, but the decision is YOURS.
Please feel free to donate to my filament/maintance fund.

Posted : 02/02/2018 5:20 pm
robert.m44
(@robert-m44)
New Member
Re: Ship Date Tracking Spreadsheet

Well mine hit koeln & was there for 6 hrs & 17 min....(a surprise considering all the Koeln stories on the forum) and now has hit Philadelphia & left. UPS has it moving along. Maybe UPS is getting the shipping down better or just brought a bigger plane in.

Posted : 02/02/2018 6:07 pm
JustJustice
(@justjustice)
New Member
Re: Ship Date Tracking Spreadsheet

Sounds like you got lucky... I expect mine to land in Louisville. I got an email yesterday from UPS to expect delivery today between 9-1pm and then the tracking changed to this "We were unable to load the package on the plane as scheduled. / Your delivery has been rescheduled for the next business day". I am not a happy camper right now.

Posted : 02/02/2018 6:37 pm
HeySideburns
(@heysideburns)
Trusted Member
Re: Ship Date Tracking Spreadsheet

Shot in the dark, but ... does anyone know from experience if Czech customs will clear a package over the weekend? My printer got there at 6:54 PM today (Friday). I'm trying to determine how likely it is I'll get the printer early to mid next week or closer to next weekend (where I'll need to make arrangements for someone to pick it up for me). Thanks in advance. 🙂

Posted : 02/02/2018 9:31 pm
RH_Dreambox
(@rh_dreambox)
Prominent Member
Re: Ship Date Tracking Spreadsheet

My printers travel
Prague (Prusa factory) to Koeln Germany then Malmö Sweden then Jönköping Sweden

Distance = 1760 km, transport time 19 hours

Then Jönköping to me 56 km transport time 80 hours or more 👿 (Severe weather conditions have delayed delivery.)
Still waiting!

Bear MK3 with Bondtech extruder

Posted : 04/02/2018 11:17 am
hiElvis
(@hielvis)
Eminent Member
Re: Ship Date Tracking Spreadsheet

Whats the consensus for adding lines to the sheet?

Do I just append my info at the bottom and one of the "admins" moves it to its right spot?

Posted : 05/02/2018 10:46 am
RH_Dreambox
(@rh_dreambox)
Prominent Member
Re: Ship Date Tracking Spreadsheet

Type your data at the bottom and they will be updated and moved to the correct location.
Be sure to enter the correct date format.

Bear MK3 with Bondtech extruder

Posted : 05/02/2018 12:54 pm
hiElvis
(@hielvis)
Eminent Member
Re: Ship Date Tracking Spreadsheet


Type your data at the bottom and they will be updated and moved to the correct location.
Be sure to enter the correct date format.

Thanks, done!

Hope I didn't break anything 😉

Posted : 05/02/2018 1:16 pm
HeySideburns
(@heysideburns)
Trusted Member
Re: Ship Date Tracking Spreadsheet


Shot in the dark, but ... does anyone know from experience if Czech customs will clear a package over the weekend? My printer got there at 6:54 PM today (Friday). I'm trying to determine how likely it is I'll get the printer early to mid next week or closer to next weekend (where I'll need to make arrangements for someone to pick it up for me). Thanks in advance. 🙂

FWIW, it doesn't appear that they clear packages over the weekend. Mine didn't get cleared until Monday.

Posted : 05/02/2018 11:30 pm
hiElvis
(@hielvis)
Eminent Member
Re: Ship Date Tracking Spreadsheet

Does anyone know if combining the kit order with a later order of filament did or does lead to a delay of initial order? Should've been easily spotted for anyone with combined shipments when comparing to similar order dates of others from the sheet?!

Posted : 06/02/2018 3:26 pm
xhillb61
(@xhillb61)
Trusted Member
Re: Ship Date Tracking Spreadsheet

I was so tired of waiting, so I bought a UP Mini yesterday for 110 €. Just to get into 3d printing

Posted : 06/02/2018 3:42 pm
Peter L
(@peter-l)
Honorable Member
Re: Ship Date Tracking Spreadsheet


I was so tired of waiting, so I bought a UP Mini yesterday for 110 €. Just to get into 3d printing

That's a respectable starter printer. I have two other printers from TierTime and they work well, though they don't work quite the same as the open source printers.

Posted : 06/02/2018 3:57 pm
kevindub
(@kevindub)
Active Member
Re: Ship Date Tracking Spreadsheet

Anyone else seeing blank cells on the Orders sheet? Did someone mess something up or is my browser just misbehaving.

I wanted to update that my kit did not come with the powder coated steel sheet.

Posted : 06/02/2018 4:11 pm
Allanimal
(@allanimal)
Eminent Member
Re: Ship Date Tracking Spreadsheet


Anyone else seeing blank cells on the Orders sheet? Did someone mess something up or is my browser just misbehaving.

I wanted to update that my kit did not come with the powder coated steel sheet.

I'm in the same boat. Wanted to indicate that my shipment arrived, but its all blank on the orders page.

EDIT: It's back now.

Posted : 06/02/2018 4:18 pm
dryja123
(@dryja123)
Honorable Member
Re: Ship Date Tracking Spreadsheet


I was so tired of waiting, so I bought a UP Mini yesterday for 110 €. Just to get into 3d printing

I did the same exact thing as you. I bought the MonoPrice Mini v2 when it was on sale for cyber Monday. I learned a ton about 3d printing on that thing and it really helped me get successful prints on the MK3. I'm approaching 100 hours of print time, on the MK3, without a single failed print.

Posted : 06/02/2018 5:32 pm
michael.r52
(@michael-r52)
Eminent Member
Re: Ship Date Tracking Spreadsheet

Updated the 'Shipping time by country' sheet using the python script and instructions. Worked great !
Great job on the instructions and Code. Worked 1st time which is amazing considering I haven't used Python in about a year and this is my first experience with a google spreadsheet .
macOS 10.13.3 Python 2.7

Posted : 07/02/2018 7:19 am
hiElvis
(@hielvis)
Eminent Member
Re: Ship Date Tracking Spreadsheet


Updated the 'Shipping time by country' sheet using the python script and instructions. Worked great !
Great job on the instructions and Code. Worked 1st time which is amazing considering I haven't used Python in about a year and this is my first experience with a google spreadsheet .
macOS 10.13.3 Python 2.7

If you want to train your python skills further, you could exclude all the "local pickups" from Josefs countrymen, they are "cheating" the system, making the czech delivery times better than they are 😀

PS: Just got my tracking no :mrgreen:

Posted : 07/02/2018 3:13 pm
Page 34 / 88
Share: