Notifications
Clear all

Powder-coated sheets vouchers?  

Page 3 / 7
  RSS
ACDawg
(@acdawg)
Eminent Member
Re: Powder-coated sheets vouchers?



Something I haven't seen mentioned in a long time is the powder coated glossy sheets. Any word on if those are still going to happen? I assume they have been scrapped but I don't recall seeing anything official.

It was official, in one of the updates they did say that they scrapped the powder coated glossy sheets. Do not remember if it was for time being and or it was scrapped for good.

Hmm, I can't seem to find that update. Thanks for the info, though.

Posted : 07/11/2018 7:15 pm
RobertB67
(@robertb67)
Trusted Member
Re: Powder-coated sheets vouchers?




Something I haven't seen mentioned in a long time is the powder coated glossy sheets. Any word on if those are still going to happen? I assume they have been scrapped but I don't recall seeing anything official.

It was official, in one of the updates they did say that they scrapped the powder coated glossy sheets. Do not remember if it was for time being and or it was scrapped for good.

Hmm, I can't seem to find that update. Thanks for the info, though.

"we also decided to step away from the plans regarding the production of glossy powder-coated sheets. Maybe we’ll come back to them sometime in the future"

you can find it at the end of this update:
https://www.prusaprinters.org/firmware-3-4-0-with-filament-sensor-engine-2-0-is-out/

Posted : 07/11/2018 7:45 pm
heroeant
(@heroeant)
Active Member
Re: Powder-coated sheets vouchers?

I just got my voucher for the powder coated steel sheet.
Yay!?!? ...after like a year of waiting.
I'm still salty because I bought my printer the day it was announced and having to wait all this time, when some people got them even if they bought their printers way later.

Posted : 09/11/2018 9:19 pm
Olef
 Olef
(@olef)
Prominent Member
Re: Powder-coated sheets vouchers?

Yep, day 2 order for Mk3 here, just got my voucher too. Now just waiting for the Mk2.5 upgrade kit voucher for the powder coated sheet.

Posted : 10/11/2018 9:42 am
Ido
 Ido
(@ido)
Trusted Member
Re: Powder-coated sheets vouchers?

Ordered my mk3 on 3 okt 2017, wondere where I am on the list. No voucher yet 🙂

Support couldnt help me unfortunately.

Posted : 10/11/2018 10:17 am
nuroo
(@nuroo)
Reputable Member
Topic starter answered:
Re: Powder-coated sheets vouchers?

Got my voucher yesterday. Put order thru immediately. Unfortunately Prusa had a PayPal issue on their system. According to a follow up email everyone who used PayPal for special voucher had same problem. So I just used a credit card, and it went thru. Shipping status - shipping soon

Prusa MK3 preassembled (R2/B6) > (R3/B/7)
Prusa MK2.5 kit > MK3 > MK3+MMU2 (R3/B/7) 😀
Prusa SL1 3D printer + Curing and Washing Machine (day1 order)
Taz6
CR10s4
Delta 3ku

Posted : 10/11/2018 2:16 pm
dryja123
(@dryja123)
Honorable Member
Re: Powder-coated sheets vouchers?


Ordered my mk3 on 3 okt 2017, wondere where I am on the list. No voucher yet 🙂

Support couldnt help me unfortunately.

We're going to be in the same boat and we're going to have to wait a while. Any time a hot new product hits the market the the time that it goes up for sale usually sees the highest volume of orders. So of the 17,000 outstanding sheets that need to be fulfilled I'd say we probably fall around being in the ballpark of the 6,000 - 8,000 in line. That's purely speculation but the line before us is very very long.

Posted : 10/11/2018 2:53 pm
nuroo
(@nuroo)
Reputable Member
Topic starter answered:
Re: Powder-coated sheets vouchers?

Shipping notice from DHL:
2nd powder coated sheet arriving tomorrow along with 3 rolls Prusament :mrgreen:

Prusa MK3 preassembled (R2/B6) > (R3/B/7)
Prusa MK2.5 kit > MK3 > MK3+MMU2 (R3/B/7) 😀
Prusa SL1 3D printer + Curing and Washing Machine (day1 order)
Taz6
CR10s4
Delta 3ku

Posted : 12/11/2018 5:18 pm
dryja123
(@dryja123)
Honorable Member
Re: Powder-coated sheets vouchers?


Shipping notice for DHL:
2nd powder coated sheet arriving tomorrow along with 3 rolls Prusament :mrgreen:

Ohhhh I'm jealous :mrgreen: when did you order your printer?

Posted : 12/11/2018 5:22 pm
nuroo
(@nuroo)
Reputable Member
Topic starter answered:
Re: Powder-coated sheets vouchers?

Pretty much day 1

Prusa MK3 preassembled (R2/B6) > (R3/B/7)
Prusa MK2.5 kit > MK3 > MK3+MMU2 (R3/B/7) 😀
Prusa SL1 3D printer + Curing and Washing Machine (day1 order)
Taz6
CR10s4
Delta 3ku

Posted : 12/11/2018 5:27 pm
ACDawg
(@acdawg)
Eminent Member
Re: Powder-coated sheets vouchers?



It was official, in one of the updates they did say that they scrapped the powder coated glossy sheets. Do not remember if it was for time being and or it was scrapped for good.

Hmm, I can't seem to find that update. Thanks for the info, though.

"we also decided to step away from the plans regarding the production of glossy powder-coated sheets. Maybe we’ll come back to them sometime in the future"

you can find it at the end of this update:
https://www.prusaprinters.org/firmware-3-4-0-with-filament-sensor-engine-2-0-is-out/

Ah, thanks. Must've missed that.

Posted : 13/11/2018 6:25 pm
Frigo007
(@frigo007)
Active Member
Re: Powder-coated sheets vouchers?

So he arrived today. Is perfect 😀

Posted : 13/11/2018 7:19 pm
nuroo
(@nuroo)
Reputable Member
Topic starter answered:
Re: Powder-coated sheets vouchers?

I cant complain any more, what will I do now.
MMU2 finally working good, 2 textured powered coated sheets and some Prusament thats so precisely tolerant I feel like I have to leave it in the box and use Inland

Prusa MK3 preassembled (R2/B6) > (R3/B/7)
Prusa MK2.5 kit > MK3 > MK3+MMU2 (R3/B/7) 😀
Prusa SL1 3D printer + Curing and Washing Machine (day1 order)
Taz6
CR10s4
Delta 3ku

Posted : 14/11/2018 3:20 am
nuroo
(@nuroo)
Reputable Member
Topic starter answered:
Re: Powder-coated sheets vouchers?

"we also decided to step away from the plans regarding the production of glossy powder-coated sheets. Maybe we’ll come back to them sometime in the future"

I would have tried the glossy version.

Prusa MK3 preassembled (R2/B6) > (R3/B/7)
Prusa MK2.5 kit > MK3 > MK3+MMU2 (R3/B/7) 😀
Prusa SL1 3D printer + Curing and Washing Machine (day1 order)
Taz6
CR10s4
Delta 3ku

Posted : 14/11/2018 12:55 pm
ACDawg
(@acdawg)
Eminent Member
Re: Powder-coated sheets vouchers?


"we also decided to step away from the plans regarding the production of glossy powder-coated sheets. Maybe we’ll come back to them sometime in the future"

I would have tried the glossy version.

Same here, that's what I was hoping for. Same bottom layer as the sticker PEI but supposedly more durable.

Posted : 14/11/2018 4:54 pm
cwbullet
(@cwbullet)
Member
Re: Powder-coated sheets vouchers?



"we also decided to step away from the plans regarding the production of glossy powder-coated sheets. Maybe we’ll come back to them sometime in the future"

I would have tried the glossy version.

Same here, that's what I was hoping for. Same bottom layer as the sticker PEI but supposedly more durable.

It is more durable and may be less “sticky”. That may be a good thing with PETG.

--------------------
Chuck H
3D Printer Review Blog

Posted : 14/11/2018 9:54 pm
RobertB67
(@robertb67)
Trusted Member
Re: Powder-coated sheets vouchers?


"we also decided to step away from the plans regarding the production of glossy powder-coated sheets. Maybe we’ll come back to them sometime in the future"

I would have tried the glossy version.

No worries, at this rate China will have them on aliexpress.com soon :mrgreen:

Posted : 15/11/2018 5:47 am
rotarypower101
(@rotarypower101)
Estimable Member
Re: Powder-coated sheets vouchers?

How do the Vouchers work?

Has "everyone" already received conformation?

I have not received any details via email conformation of Option 1 Powder Coated sheet as my selection which was made by November11 as instructed.

And I still see zero activity on the “MY VOUCHERS” tab on my account at Prusa3d.

Is information on this forthcoming? Or am I just being too impatient after a year and some change?

Is there information about this somewhere I need to follow to keep up to date with what is happening, and what will happen?

Just click on one of the answers and we will send you your voucher early next week - most probably already during Monday, 5th November.

Posted : 19/11/2018 8:38 pm
Olef
 Olef
(@olef)
Prominent Member
Re: Powder-coated sheets vouchers?

As with many things from Josef my voucher did not happen by the estimated 5th November, but on the 9th I received an email with a URL link which contained a voucher code specific to me. I clicked on it and ordered immediately so I have no idea if it ever appeared in the My Account voucher section.

So I imagine your voucher will come to you in due course. I had to wait a few days for it to ship but my powder coated sheet finally reached me today, extremely well packed and protected. One year, one month and 25 days after I ordered my Mk3. It looks good, I'm almost afraid to use it!

Still haven't seen any sign of the voucher email for the TXT sheet for the Mk2.5 conversion kit I ordered 18th October last year though... still waiting...

Posted : 19/11/2018 11:33 pm
dryja123
(@dryja123)
Honorable Member
Re: Powder-coated sheets vouchers?


As with many things from Josef my voucher did not happen by the estimated 5th November, but on the 9th I received an email with a URL link which contained a voucher code specific to me. I clicked on it and ordered immediately so I have no idea if it ever appeared in the My Account voucher section.

So I imagine your voucher will come to you in due course. I had to wait a few days for it to ship but my powder coated sheet finally reached me today, extremely well packed and protected. One year, one month and 19 days after I ordered my Mk3. It looks good, I'm almost afraid to use it!

Still haven't seen any sign of the voucher email for the TXT sheet for the Mk2.5 conversion kit I ordered 18th October last year though... still waiting...

Sweet, so you're October 1st? Hopefully I'll get my e-mail soon, I'm October 28th. I know a ton of printers were probably ordered since the 1st to the 28th but I'm hoping

Posted : 20/11/2018 1:22 am
Page 3 / 7
Share: