Can we ask the printer to make a beep sound once printing is done?
 

Can we ask the printer to make a beep sound once printing is done?  

  RSS
peter.c20
(@peter-c20)
Estimable Member

Hi, I need to keep checking the print process as it is in another room. Is it possible to make the printer to produce a beep sound or a short melody once it has done printing?

This topic was modified 3 months ago by peter.c20
Posted : 15/05/2020 7:45 pm
1agkirk2
(@1agkirk2)
Eminent Member

The answer is yes.  You will need to add statements to the g-code.  I have never done this so do not which statements are needed.

Posted : 15/05/2020 8:11 pm
bobstro
(@bobstro)
Illustrious Member

There's an old thread on this. I personally hate loud beeps, but insert little chirps at various times during the print by adding this line to start and end gcode under Printer Settings->Custom g-code:

M300 S40 P10 ; chirp

My notes and disclaimers on 3D printing and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan...
Posted : 15/05/2020 8:25 pm
Karl Herbert
(@karl-herbert)
Famed Member
Posted by: @peter-c20

Hi, I need to keep checking the print process as it is in another room. Is it possible to make the printer to produce a beep sound or a short melody once it has done printing?

I'm using this simply sequence at the gcode end section:

M300 S1000 P500 ;First beep
M300 S0 P500 ;Wait
M300 S1000 P1000 ;Second beep
M300 S0 P500 ;Wait
M300 S1000 P1500 ;Third beep

This post was modified 3 months ago by Karl Herbert
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen....
Posted : 15/05/2020 10:40 pm
david.j21 liked
Share:

Please Login or Register