printing PETG- changed the top of my build plate from OVERTURE 3D Build Surface to tape and now nothing sticks
 
Notifications
Clear all

printing PETG- changed the top of my build plate from OVERTURE 3D Build Surface to tape and now nothing sticks  

  RSS
Rebecca Quesnel
(@rebecca-quesnel)
Active Member
printing PETG- changed the top of my build plate from OVERTURE 3D Build Surface to tape and now nothing sticks

Hi guys, 

so I changed what was on top of my build plate today because I accidentally ripped the sheet that was ontop of my steel sheet. Now i have the blue painters tape and no matter what I do it wont stick. I've moved the Z axis everywhere. Tried rubbing alcohol, glue sticks... moved heat of bed up and down, moved nozzle heat up and down. Can't figure it out so I am open to suggestions. 

Posted : 25/11/2019 12:51 am
Rebecca Quesnel
(@rebecca-quesnel)
Active Member
Topic starter answered:
RE: printing PETG- changed the top of my build plate from OVERTURE 3D Build Surface to tape and now nothing sticks

I want to add that it either squishes up all over the nozzle, or comes out and doesn't stick well and eventually gets pushed away 

Posted : 25/11/2019 12:51 am
Share: