Notifiche
Cancella tutti

[Risolto] Fresh Build - X Axis issue  

  RSS
ITKosta29
(@itkosta29)
New Member
Fresh Build - X Axis issue

Calibrated twice and I don't know what the issue might be.  Calibration indicated that everything was perfectly level.  Any pointers?

 

Postato : 31/01/2021 9:16 pm
ITKosta29
(@itkosta29)
New Member
Topic starter answered:
RE: Fresh Build - X Axis issue

Fixed my own issue after a bit of researching.  Problem was x axis belt was too tight.  x and y belts are around 250 now and xyz cube is spot on perfect.

Postato : 31/01/2021 11:44 pm
Dan Rogers
(@dan-rogers)
Noble Member
RE: Fresh Build - X Axis issue

@itkosta29

It's worth downloading the belt tightening gauge pattern from the library - it's a GCODE file that prints out a physical gauge that you slip onto the belt (per directions provided with the pattern) and lets you see the upper/lower range.  Good backup for the numbers on the screen.

Postato : 02/02/2021 6:21 pm
ITKosta29
(@itkosta29)
New Member
Topic starter answered:
RE: Fresh Build - X Axis issue

@dan-rogers

Cool thanks.  Could you please link me to the page you are suggesting?

Postato : 02/02/2021 6:40 pm
Condividi: