[Solved] Fresh Build - X Axis issue  

  RSS
ITKosta29
(@itkosta29)
New Member

Calibrated twice and I don't know what the issue might be.  Calibration indicated that everything was perfectly level.  Any pointers?

 

Posted : 31/01/2021 9:16 pm
ITKosta29
(@itkosta29)
New Member

Fixed my own issue after a bit of researching.  Problem was x axis belt was too tight.  x and y belts are around 250 now and xyz cube is spot on perfect.

Posted : 31/01/2021 11:44 pm
Dan Rogers
(@dan-rogers)
Prominent Member

@itkosta29

It's worth downloading the belt tightening gauge pattern from the library - it's a GCODE file that prints out a physical gauge that you slip onto the belt (per directions provided with the pattern) and lets you see the upper/lower range.  Good backup for the numbers on the screen.

Posted : 02/02/2021 6:21 pm
ITKosta29
(@itkosta29)
New Member

@dan-rogers

Cool thanks.  Could you please link me to the page you are suggesting?

Posted : 02/02/2021 6:40 pm
Share:

Please Login or Register