Notifications
Clear all

First Layer Cal  

  RSS
Gonz IOS
(@gonz-ios)
New Member
First Layer Cal

Hi

I bought a MK3S,  when doing the first layer calibration, it starts to get stuck in the nozzle, which seems strange to me, because I am barely measuring -0.20 mm, I am using the PLA that comes with the printer

 

Help 🙁

Posted : 01/06/2020 4:46 am
DamienB
(@damienb)
Active Member
RE: First Layer Cal

Hey

Your nozzle is most likely too low. When doing the first layer calibration, adjust your Live Z height. I created an STL file with a larger area so you have more time to adjust it.

Try this: https://www.myminifactory.com/object/3d-print-first-layer-calibration-114112

Posted : 01/06/2020 9:53 am
Cynan
(@cynan)
Estimable Member
RE: First Layer Cal

Stuck in or on the nozzle? If it's getting stuck on the nozzle, is your live Z to high? So the filament is extruding, curling and getting stuck?

Posted : 02/06/2020 1:30 pm
Share: