Avisos
Vaciar todo

Click Click on Moving to the Right  

  RSS
akerezy
(@akerezy)
Eminent Member
Click Click on Moving to the Right

Hi,

  All of a sudden I'm getting a clicking sound as my printer moves from left to right (I think that's the x axis).  Please watch the video to hear this, it's towards the end of the video. 

https://my-forum-posts.s3.us-east-2.amazonaws.com/PrusaClickClick.mp4

  I saw somebody else had this problem and felt the belt needed tightened.

Any Thoughts?

If it is the x axis belt, are there any videos to show step by step how to do this?

Cornfuzed in Columbus

Respondido : 05/06/2020 8:33 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Click Click on Moving to the Right
Posted by: @akerezy

Hi,

  All of a sudden I'm getting a clicking sound as my printer moves from left to right (I think that's the x axis).  Please watch the video to hear this, it's towards the end of the video. 

https://my-forum-posts.s3.us-east-2.amazonaws.com/PrusaClickClick.mp4

  I saw somebody else had this problem and felt the belt needed tightened.

Any Thoughts?

If it is the x axis belt, are there any videos to show step by step how to do this?

Cornfuzed in Columbus

I think you have no problem with the X/Y/Z axis, it's rather the extruder. The hotend is blocked and the filament cannot be extruded. How to clean the hotend you can find here: https://help.prusa3d.com/en/article/clogged-hotend_2008

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Respondido : 05/06/2020 11:19 pm
Bunny Science
(@bunny-science)
Noble Member
RE: Click Click on Moving to the Right

I agree that sounds more like the extruder is having a problem. Notice how it makes that noise even during a Y-motion without X movement.

 

Esta publicación ha sido modificada el hace 4 years por Bunny Science
Respondido : 05/06/2020 11:50 pm
Compartir: