Notifications
Clear all

problema al imprimir  

  RSS
Alejandro
(@alejandro-2)
Active Member
problema al imprimir

Problema al iniciar impresion , tengo un problema cuando quiero iniciar una impresion , la cabeza de impresion hace bien el conteo de los 9 puntos y al irse al iniciar la impresion va he baja hasta la cama y despues se levanta y se va al lado derecho de la impresora  se queda pitando y dice que pulse el dial para descargar el filamento , y tengo que apagarla o reiniciarla para dejarla bien como al inicio , alguien me puede ayudar por favor , muchas gracias

Alejandro Gonzalez 😫 

Posted : 26/12/2020 2:41 pm
JoanTabb
(@joantabb)
Moderator
RE: problema al imprimir

Hi Alejndro, 
try turning the filament sensor off and try again...

is your printer mk3S  or mk3S+

there is a spacer on Thingiverse which may help with your filament sensor

https://www.thingiverse.com/thing:4006603
 regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK...
Posted : 26/12/2020 3:55 pm
Alejandro
(@alejandro-2)
Active Member
Topic starter answered:
RE: problema al imprimir

😀 Hello joantabb I did what you tell me in your post but it did not work for me, it is still the same, I have the prusa i3 mk3 without the S, I hope you can help me I would appreciate it very much ok? thanks Alejandro Gonzalez

 

Posted : 26/12/2020 4:45 pm
Alejandro
(@alejandro-2)
Active Member
Topic starter answered:
RE: problema al imprimir

@joantabb

I can't print now as the printer is not working for me until that error is fixed, but thanks for the file

Posted : 26/12/2020 4:48 pm
JoanTabb
(@joantabb)
Moderator
RE: problema al imprimir

Have you tried turning the filament sensor off. to stop it trying to change filament erroneously? 
this should enable you to print the part! 

regards Joan 

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK...
Posted : 26/12/2020 5:14 pm
Alejandro
(@alejandro-2)
Active Member
Topic starter answered:
RE: problema al imprimir
I have tried to print without the filament sensor and without filament and it keeps showing me the same error, I don't know how to put videos here I would send you one so you could see the error and so you could give me your opinion, thanks again, you are very kind
 
 
 
Posted : 26/12/2020 6:39 pm
Kalimero
(@kalimero)
Reputable Member
RE: problema al imprimir

Click on Add Media and next menu will appear.

OnShape, PrusaSlicer, MINI, PETG; engineer...
Posted : 27/12/2020 8:04 am
Share: