Raspberry pi zero WH installation  

  RSS
impression3D.xyz
(@impression3d)
Eminent Member

Hi,

 

I just bought a raspberry pi ZERO WH with pins in order to avoid to do weldings, to install it in my MK3S printer,  but once installed it does not hold in place.. someone has someone already tried it and has an idea how to hold it?

 

Thanks for your help

This topic was modified 2 months ago by impression3D.xyz
Prusa MK3S :-)...
Posted : 05/06/2020 9:12 pm
impression3D.xyz
(@impression3d)
Eminent Member

i followed this guide .. : https://howchoo.com/g/mdmwzgfhmjf/octoprint-prusa-i3-mk3s

Prusa MK3S :-)...
Posted : 05/06/2020 10:11 pm
Karl Herbert
(@karl-herbert)
Famed Member
Posted by: @impression3d

Hi,

 

I just bought a raspberry pi ZERO WH with pins in order to avoid to do weldings, to install it in my MK3S printer,  but once installed it does not hold in place.. someone has someone already tried it and has an idea how to hold it?

 

Thanks for your help

If you do not want to plug the RPI Zero directly onto the einsy board, you can also establish the connection with a ribbon cable or with jumper wires and use your own housing for the Zero like this: https://www.thingiverse.com/thing:3465254

The housing you could mount on the printer frame.

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen....
Posted : 06/06/2020 12:10 am
impression3D.xyz
(@impression3d)
Eminent Member

HI,

thanks for your answer. jumper wires is a good idea, with short ones i can put the pi in place on the good location. i prefer to put it at the good location as expected because the cleaner and more practical it is when i move the printer.

the housing is nice for. other printers like ender3 and so on.

 

 

Prusa MK3S :-)...
Posted : 06/06/2020 7:28 am
impression3D.xyz
(@impression3d)
Eminent Member

i bought that i think i will hep to plug the raspberry pi zero WH correctly 🙂 : https://fr.aliexpress.com/item/32589775433.html?spm=a2g0s.9042311.0.0.2c616c37k8in1o

i prefer to put the rpi inside the MK3S, better integration, no external alimentation...  🙂

Prusa MK3S :-)...
Posted : 06/06/2020 9:07 pm
claire.k
(@claire-k)
Honorable Member

Bonsoir.  Tu résides en France ?   Ici  tu peux parler français   nous on aime bien  😋 

Sinon   on se débrouille aussi avec la langue de chèquespire, no problèmo.

Posted : 07/06/2020 8:49 pm
impression3D.xyz
(@impression3d)
Eminent Member

Bonjour

 

je pensais avoir posté dans le forum anglais désolé 🙂

Oui je suis francais, d'Alsace 🙂

Du coup pour info j'ai acheté ca pour connecter le rasp zero WH : https://fr.aliexpress.com/item/32589775433.html

Prusa MK3S :-)...
Posted : 09/06/2020 9:53 am
Share:

Please Login or Register