Notifications
Clear all

Can you print Taulman 910 on the powder coated sheet  

  RSS
KLAUS
(@klaus-3)
Trusted Member
Can you print Taulman 910 on the powder coated sheet

Was wondering If it is possible to print Taulman alloy 910 nylon on the Prusa powder coated sheet?

Has any one had success with this? What type of glue did you use on the bed?

Thanks

Posted : 01/02/2019 9:57 pm
Slavkosky
(@slavkosky)
Active Member
RE: Can you print Taulman 910 on the powder coated sheet

Bringing this post back from the dead. I'm wondering the same thing!

i3 MK3S+

(stock)
- Powder-coated, Satin, & Garolite Sheets
- 0.25/0.4/0.5/0.6/0.8mm NozzleX
- 0.6mm Bondtech CHT
_____SL1S & CW1S (stock)

Posted : 06/04/2021 10:36 am
bobstro
(@bobstro)
Illustrious Member
RE: Can you print Taulman 910 on the powder coated sheet

FWIW - I was able to print Taulman Bridge on the smooth PEI sheet by applying a coat of glue stick. I used the glue stick Prusa provided with the Mk3 printer.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 06/04/2021 2:56 pm
egar
 egar
(@egar)
Estimable Member
RE: Can you print Taulman 910 on the powder coated sheet

@slavkosky

Take a look at Prusa's material guide page -- https://help.prusa3d.com/en/materials

There's a section on nylon.  I can't speak from experience, so take this for what it's worth

Posted : 06/04/2021 4:30 pm
cwbullet
(@cwbullet)
Member
RE: Can you print Taulman 910 on the powder coated sheet

@bobstro

Same here.  I have not tried on the textured sheet.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 07/04/2021 12:59 am
Slavkosky
(@slavkosky)
Active Member
RE: Can you print Taulman 910 on the powder coated sheet

Hmm, ok thanks for the insight! I'll be trying it soon after I dry my spool of Black Alloy 910. I'll try with/without glue stick and report back

i3 MK3S+

(stock)
- Powder-coated, Satin, & Garolite Sheets
- 0.25/0.4/0.5/0.6/0.8mm NozzleX
- 0.6mm Bondtech CHT
_____SL1S & CW1S (stock)

Posted : 07/04/2021 3:18 am
Slavkosky
(@slavkosky)
Active Member
RE: Can you print Taulman 910 on the powder coated sheet

Seems that the textured sheet worked great after dialing in Live Z Calibration and adding a bit of glue stick. I was initially too close to the bed and ended up with the first layer supports all over my nozzle instantly jamming it, but once I backed off a bit the 910 laid-down beautifully! I haven't tried a bigger part, I was just printing a small gear (I plan on building the V2 Lack enclosure before printing larger with this stuff)

 

Z+ face (with top face ironing):

Z- face (no raft)

Tooth detail:

 

This thing is hard as a rock. Alloy 910 very impressive stuff!

i3 MK3S+

(stock)
- Powder-coated, Satin, & Garolite Sheets
- 0.25/0.4/0.5/0.6/0.8mm NozzleX
- 0.6mm Bondtech CHT
_____SL1S & CW1S (stock)

Posted : 14/04/2021 2:18 am
ffdez
(@ffdez)
Active Member
RE: Can you print Taulman 910 on the powder coated sheet

Hi. Try Garolite. I use it with success (no glue or anything over the bed) with eSun PAHT-CF.

Posted : 31/08/2021 6:17 pm
Share: