Notifications
Clear all
MK2.5S All temperatures sensors are overreading
Hi,
I have a rock solid working mk3s and a mk2.5s next to it.
If I power on both printers, and leave them for a few minutes to settle in, go to the temperature sensor values :-
On the MK3s, all temperatures read aprox 20c
On the MK2.5s, all temperatures read 28c
The actual room temperature is around 20c
To clarify when I say all temperatures, I mean extruder, bed and PINDA in the calibration menu.
It seems really strange that all 3 sensors would be off by exactly 8 degrees.
If for example only the extruder was reading high, then I would have a simple case of having a bad thermistor.
Anyone got any ideas?
Many thanks
Posted : 19/10/2019 12:58 pm
RE: MK2.5S All temperatures sensors are overreading
thermister cal table in the firmware?
Posted : 21/10/2019 5:47 pm