Notifications
Clear all
MinTemp Error when Extruder Crosses Specific X Position
I keep getting this MinTemp Error when the extruder crosses a specific X position. I have checked for loos wires but not sure what else to look for. Need some suggestions fixing . Thank you
Video Here:
<iframe src="https://onedrive.live.com/embed?cid=97E3C4B2C3B90E23&resid=97E3C4B2C3B90E23%21750375&authkey=ANK1T1KIjzss3Hc" width="181" height="320" frameborder="0" scrolling="no" allowfullscreen></iframe>
This topic was modified 3 years ago 3 times by K6TJO
Posted : 13/06/2021 9:39 pm
Topic starter
answered:
RE: MinTemp Error when Extruder Crosses Specific X Position
Having trouble uploading my video. Trying again here because I can no longer edit my post for some reason.
Posted : 13/06/2021 9:48 pm
RE: MinTemp Error when Extruder Crosses Specific X Position
@k6tjo
Prusa gives here some tips on the problem mintemp error: https://help.prusa3d.com/en/article/mintemp-and-mintemp-bed_2169
It is best to check all wires and thermistors step by step with a simple multimeter. The ambient temperature should also not be below 15-20 degrees C.
good luck!
wbr,
Karl
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.
Posted : 14/06/2021 12:55 pm