Notifications
Clear all

[Solved] PrusaSlicer - Choix Extrudeur Impossible STL multipart.  

  RSS
Christophe
(@christophe)
Trusted Member
PrusaSlicer - Choix Extrudeur Impossible STL multipart.

Bonsoir à tous,

D'ici 1/ 2 jours je dois recevoir mon kit MMU2S pour ma Prusa i3 Mk3S.

En attendant, je m'entraîne donc avec Meshmixer et PrusaSlicer afin de générer un gcode multicouleur.

Mais je bloque sur un point. Quand j'importe mon STL multipart, et bien je n'ai pas l'option afin de choisir le numéro d'extrudeur à  appliquer sur chaque part.

J'ai beau lire et relire les différents mode emploi / tuto, je n'arrive pas à avoir le menu qui va bien. Je dois oublier / rater une étape ..., mais je ne vois pas quoi ...

Pour être certain que les fichiers multiples étaient conformes, j'ai récupéré les fichiers sur le site de Prusa.

J'insert bien les multiples fichiers et j'ai bien le message à la fin, comme quoi le slicer a détecté un objet multi pièces.

Je clique sur "Oui".

 

Je récupère l'objet, mais à droite je n'ai pas le menu "choix extrudeur".

Comme sur le screen du tuto, ci dessous.

Quelqu'un aurait un idée ?

Je ne sais plus quoi faire ....

 

Merci par avance

Bonne soirée.

Christophe

Best Answer by JoanTabb:

Utilisez-vous le mode expert?

Dans Prusa slicer, cliquez sur Configuration> Mode> Expert!

cela devrait entraîner l'ouverture des options de l'extrudeuse ...

ou sélectionnez un élément, puis cliquez avec le bouton droit sur l'objet pour afficher un sous-menu et choisir extrudeur à partir de là!


salutations Joan

Are you using  Expert mode? 

In Prusa slicer click on Configuration>Mode>Expert!

this should cause the extruder options to open up...  

or select an element, then right click on the object to expose a sub menu and choose extruder from there! 

 

regards Joan

 

This topic was modified 4 years ago by Christophe

Christophe
Prusa i3MK3S + MMU2S - Prusa Mini / buse 0.25
Creality Ender 3 & CR10S

Posted : 03/12/2019 9:16 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: PrusaSlicer - Choix Extrudeur Impossible STL multipart.
Utilisez-vous le mode expert?

Dans Prusa slicer, cliquez sur Configuration> Mode> Expert!

cela devrait entraîner l'ouverture des options de l'extrudeuse ...

ou sélectionnez un élément, puis cliquez avec le bouton droit sur l'objet pour afficher un sous-menu et choisir extrudeur à partir de là!


salutations Joan

Are you using  Expert mode? 

In Prusa slicer click on Configuration>Mode>Expert!

this should cause the extruder options to open up...  

or select an element, then right click on the object to expose a sub menu and choose extruder from there! 

 

regards Joan

 

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Posted : 03/12/2019 9:29 pm
Christophe
(@christophe)
Trusted Member
Topic starter answered:
RE: PrusaSlicer - Choix Extrudeur Impossible STL multipart.

Bonsoir Joan,

Effectivement, je n'étais pas en mode "Expert" ....

Maintenant c'est OK, j'ai bien le menu choix extrudeur.

Merci bonne soirée

Have a good night.

Regards.

Christophe
Prusa i3MK3S + MMU2S - Prusa Mini / buse 0.25
Creality Ender 3 & CR10S

Posted : 03/12/2019 9:47 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: PrusaSlicer - Choix Extrudeur Impossible STL multipart.

@getoval

Glad to be able to help Christophe, 
Good night, and Happy Printing

 

Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Posted : 04/12/2019 12:33 am
Share: