MK2.5 kits - shipping schedule available?
 
Notifications
Clear all

MK2.5 kits - shipping schedule available?  

Page 1 / 2
  RSS
CRAS
 CRAS
(@cras)
Active Member
MK2.5 kits - shipping schedule available?

Since it's getting close to the end of Jan is there going to be a shipping schedule available for the MK2.5 kits?
Just curious, and anxious... think kid in a candy store! 😆

Posted : 28/01/2018 11:31 pm
digibluh
(@digibluh)
Reputable Member
Re: MK2.5 kits - shipping schedule available?

probably delayed.

Posted : 29/01/2018 4:33 am
GertL
(@gertl)
Reputable Member
Re: MK2.5 kits - shipping schedule available?

Lets wait until end of FEB, then we start nagging them.
Im really looking forward to the new bed. The other parts i dont know, my printer works really well so going with Bondtech maybe just screws things up.
Totally uninterested in the filament runout feature.

---
Gert

Posted : 29/01/2018 8:31 am
Marcel_X
(@marcel_x)
Active Member
Re: MK2.5 kits - shipping schedule available?

Had an online chat and it seems that it will be released this week. I'm not sure about the shipping schedule. I ordered mine in October, so I hope "first come, first served..." 🙂

Posted : 29/01/2018 3:13 pm
digibluh
(@digibluh)
Reputable Member
Re: MK2.5 kits - shipping schedule available?


Lets wait until end of FEB, then we start nagging them.
Im really looking forward to the new bed. The other parts i dont know, my printer works really well so going with Bondtech maybe just screws things up.
Totally uninterested in the filament runout feature.

the probe is the 2nd most important, that temperature drift is annoying. Assuming the firmware works proper. i haven't heard anyone testing that on the mk3 so maybe it does.

edit: i see some github issues and a topic already in MK3 about it so maybe not 🙁

Posted : 29/01/2018 3:50 pm
CRAS
 CRAS
(@cras)
Active Member
Topic starter answered:
Re: MK2.5 kits - shipping schedule available?

Would still be nice to hear something from Prusa on this, even if it is about a delay.

Posted : 02/02/2018 10:40 pm
digibluh
(@digibluh)
Reputable Member
Re: MK2.5 kits - shipping schedule available?


Would still be nice to hear something from Prusa on this, even if it is about a delay.

Says on the site and under orders they will start shipping MID February now. it's about the textured/powder coated sheets, there is a delay on those.

Posted : 03/02/2018 4:19 am
CRAS
 CRAS
(@cras)
Active Member
Topic starter answered:
Re: MK2.5 kits - shipping schedule available?

It's now mid-February, has anyone been notified of their MK2.5 kit being shipped?
If the delay again has to do with the spring steel sheets, I would be happy to receive my kit with the "PEI sticker" steel sheet and later order a powder coated sheet when they are available. If there's other reason(s) for the delay it would just be nice to know, a little communication can go a long way!

Posted : 18/02/2018 7:36 pm
DoctorRudd
(@doctorrudd)
Eminent Member
Re: MK2.5 kits - shipping schedule available?

As long, as there is no upgrade manual existing, I doubt that they will ship the kit IMHO.

Regards, Peter

Best regards, Peter

Posted : 19/02/2018 1:09 pm
digibluh
(@digibluh)
Reputable Member
Re: MK2.5 kits - shipping schedule available?


It's now mid-February, has anyone been notified of their MK2.5 kit being shipped?
If the delay again has to do with the spring steel sheets, I would be happy to receive my kit with the "PEI sticker" steel sheet and later order a powder coated sheet when they are available. If there's other reason(s) for the delay it would just be nice to know, a little communication can go a long way!

They should just say june/july at this point and maybe get it earlier.

Posted : 19/02/2018 5:16 pm
digibluh
(@digibluh)
Reputable Member
Re: MK2.5 kits - shipping schedule available?


As long, as there is no upgrade manual existing, I doubt that they will ship the kit IMHO.

Regards, Peter

http://manual.prusa3d.com/Answers/View/975/What+is+the+status+on+the+MK2.5+upgrade+kit


the manual for MK2.5 is going through final checks, it will be out within few days. Shipping should start next week. Not sure about the type of the sheet, I'm too busy with the manual(s).

that was 5 days ago.... there is some hope it's on schedule... i would just say march.

Posted : 19/02/2018 6:41 pm
Olef
 Olef
(@olef)
Prominent Member
Re: MK2.5 kits - shipping schedule available?

Now over four months since I placed my Mk2.5 kit order. I've been accused of being a Prusa fanboy (at my age!) but even I am losing patience.

Posted : 21/02/2018 2:28 am
digibluh
(@digibluh)
Reputable Member
Re: MK2.5 kits - shipping schedule available?

starting to think of other things i could use the money for...

Posted : 21/02/2018 3:45 am
richard.c12
(@richard-c12)
Eminent Member
Re: MK2.5 kits - shipping schedule available?

Maybe it is a race between the Mk2.5 and HL3. :mrgreen:

Posted : 21/02/2018 9:37 am
Falc
 Falc
(@falc)
Trusted Member
Re: MK2.5 kits - shipping schedule available?

they are delayed to end of the month together with the MK3 upgrade kits

dont expect them before april at the least

Posted : 21/02/2018 10:11 am
ram64
(@ram64)
Eminent Member
Re: MK2.5 kits - shipping schedule available?

It's already March now and no news so far on the upgrades being shipped (I've ordered a MK2.5 at the beginning of November). Getting inpatient but I'd wait a bit longer rather than getting a "half-baked" upgrade kit. 2-3 months delay seems usual with Prusa orders anyway. Although I would have liked a shipping table like for the MK3 machines/kits, just so we know something is happening.

Posted : 02/03/2018 10:23 am
Galduron
(@galduron)
New Member
Re: MK2.5 kits - shipping schedule available?

I ordered my 2.5 upgrade in November and decided on a new MK3 in February.

Now it almost seems as though my MK3 is arriving sooner than my upgrade.

Please Prusa, all we want is a status update on the 2.5

Posted : 02/03/2018 6:08 pm
richard.c12
(@richard-c12)
Eminent Member
Re: MK2.5 kits - shipping schedule available?

I suppose we all got the update email?

Shipping on the kits starts in a few days time with plain PEI sheets.

It seems the powdercoated sheets are again the hold up. I am fine with that. For my use the plain PEI sheets are suitable. I think I might order a spare PINDA probe though.

Posted : 02/03/2018 9:34 pm
RandomSky
(@randomsky)
Active Member
Re: MK2.5 kits - shipping schedule available?

Hey all, first post here. Got my MK2s back in June and have been printing almost daily.

With that said, I do hope someone gets around to posting the upgrade manual and updates the shipping table. Most of my impatience with getting the upgrade (ordered 16-17 weeks ago) would have been eased with a clear time table.

Posted : 02/03/2018 9:50 pm
digibluh
(@digibluh)
Reputable Member
Re: MK2.5 kits - shipping schedule available?

I think it would be good to clarify.... it says MK3's with 2.5 upgrades shipping now.... and new orders May? is a pre-order of the 2.5 upgrade only considered new? it was ordered with the voucher sometime in October i think.

Posted : 06/03/2018 10:17 pm
Page 1 / 2
Share: