The most important links - Original Prusa i3 MK2/S Multi Material
 
Notifications
Clear all

[Sticky] The most important links - Original Prusa i3 MK2/S Multi Material  

  RSS
Jakub Dolezal
(@jakub-dolezal-2)
Admin
The most important links - Original Prusa i3 MK2/S Multi Material

Hi,
here is the list of the most important links for your printer:
Please don't use this thread for general questions, create a new thread.

3D Printing Handbook for Multi Material
http://prusa3d.com/downloads/manual/prusa3d_manual_mk2mm_en.pdf

Multi Material upgrade manual
http://manual.prusa3d.com/c/Original_Prusa_i3_MK2_to_Multi_Material_upgrade

Guides how to generate Multi Material G-codes and models
http://manual.prusa3d.com/c/Creating_models

Multi Material troubleshooting
http://manual.prusa3d.com/c/Troubleshooting

Latest drivers including Slic3r PE and PrusaControl:
https://www.prusa3d.com/drivers

Latest firmware:
https://www.prusa3d.com/drivers/#firmware
How to upgrade firmware: link

Printable printer's parts:
https://www.prusa3d.com/prusa-i3-printable-parts/
Recommended print settings are 0.2 mm layer height, infill 20% GRID and material PETG

Printable 3D models:
https://www.prusa3d.com/drivers
Models are part of the driver's package

In case you think, something is missing, please let me know below and as always Happy Printing! 😉

Assembly manuals / Knowledge Base
The guy behind Prusa assembly manuals......
Posted : 12/05/2017 6:09 pm
carlos.r2
(@carlos-r2)
New Member
Re: Important Multi Material Links

Can someone please post a link to the multi material stepper motor expansion PCB files? I cant seem to find them anywhere. Thanks!

Posted : 17/10/2017 9:28 pm
JoanTabb
(@joantabb)
Moderator
Re: The most important links - Original Prusa i3 MK2/S Multi Material

Thanks Jakub
Regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK...
Posted : 03/05/2018 9:43 pm
Jacques Verreault
(@jacques-verreault)
New Member
Original Prusa i3 MK2/S Multi Material .... Maxtemp error

Hi everyone ... my name is Jacques

I have a problem with my MK2/s MMU 1.0 ... I have a maxtemp error and a high pitch sound. I've check all the wiring and all seem ok ... I need help. Has anyone had that problem before. Thank you.

...
Posted : 27/08/2021 9:31 pm
JoanTabb
(@joantabb)
Moderator

Hi Jacques, 

Mintemp either indicates a temperature below 15C, or a broken thermistor/thermistor wire, or a disconnection 

most often one of the wires breaks. 

does your LCD show 0C for either the extruder or the heatbed? that will give you a clue as to which thermistor circuit is defective.

you can replace the wires with 22AWG flexible silicone wires, regards Joan

 

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK...
Posted : 27/08/2021 9:47 pm
Share: