Notifications
Clear all

[Solved] Very strong adhesion with ASA on steel bed  

  RSS
Sam
 Sam
(@sam-2)
Active Member
Very strong adhesion with ASA on steel bed

Hello,
I have printed my first print on my new MKS3+ with ASA on the magnetic steel bed and it has an incredibly strong adhesion even after coooling. I had to use a tool to remove it. I am afraid to damage the printing bed quite fast if I do not find a way how to remove it in an easier way.

Do you have any suggestions how to cope with this?

 

BR
Sam...
Posted : 12/12/2020 8:37 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Very strong adhesion with ASA on steel bed
Posted by: @sam-10

Hello,
I have printed my first print on my new MKS3+ with ASA on the magnetic steel bed and it has an incredibly strong adhesion even after coooling. I had to use a tool to remove it. I am afraid to damage the printing bed quite fast if I do not find a way how to remove it in an easier way.

Do you have any suggestions how to cope with this?

 

Hello and welcome to the Prusaforum!

If the adhesion is too extreme, you could use a release agent. There are several on the market. Many use a simple window cleaner.

https://help.prusa3d.com/en/article/first-layer-issues_1804

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen....
Posted : 12/12/2020 9:13 pm
Share: