Brand new print surface, can't get solid print. Inconsistent Z leveling
 
Notifications
Clear all

Brand new print surface, can't get solid print. Inconsistent Z leveling  

Page 2 / 2
  RSS
Clemens M.
(@clemens-m)
Noble Member
RE: Brand new print surface, can't get solid print. Inconsistent Z leveling

@ryan-f15

I can´t see a picture.

Best regards, Clemens

Mini, i3 MK2.5S, i3 MK4, CClone (Eigenbau)

Posted : 25/02/2021 9:39 pm
ryan.f15
(@ryan-f15)
Estimable Member
Topic starter answered:
RE: Brand new print surface, can't get solid print. Inconsistent Z leveling

@clemens-m

Sorry.  Here's -0.795

 

Posted : 26/02/2021 2:56 pm
Clemens M.
(@clemens-m)
Noble Member
RE: Brand new print surface, can't get solid print. Inconsistent Z leveling

@ryan-f15

That looks quite ok, happy printing. When I started 3D printing I hated calibration of z. It was always like fear eats up soul - I permanently had fears of destroying PEI sheet or something else.

Best regards, Clemens

Mini, i3 MK2.5S, i3 MK4, CClone (Eigenbau)

Posted : 26/02/2021 3:00 pm
cwbullet
(@cwbullet)
Member
RE: Brand new print surface, can't get solid print. Inconsistent Z leveling

@ryan-f15

Good news!  

--------------------
Chuck H
3D Printer Review Blog

Posted : 26/02/2021 3:02 pm
ryan.f15
(@ryan-f15)
Estimable Member
Topic starter answered:
RE: Brand new print surface, can't get solid print. Inconsistent Z leveling

Yeah but I just tried to print something off and the left edge peeled up.  That's not good.  Pics to come

 

Posted : 26/02/2021 3:46 pm
Clemens M.
(@clemens-m)
Noble Member
RE: Brand new print surface, can't get solid print. Inconsistent Z leveling

So you have to clean up your sheet. Only IPA will not be enough. Give it a clean under hot water together with some dish washing soap. Dry it and after that again cleaning with IPA. When there is still warping then ...

Well let's start with the procedure described at the top.

Best regards, Clemens

Mini, i3 MK2.5S, i3 MK4, CClone (Eigenbau)

Posted : 26/02/2021 3:52 pm
ryan.f15
(@ryan-f15)
Estimable Member
Topic starter answered:
RE: Brand new print surface, can't get solid print. Inconsistent Z leveling

@clemens-m

This is a brand new sheet that I have cleaned with soap and water as well as IPA.  Please see attached.

Posted : 26/02/2021 4:25 pm
ryan.f15
(@ryan-f15)
Estimable Member
Topic starter answered:
RE: Brand new print surface, can't get solid print. Inconsistent Z leveling

The other pic

 
Posted : 26/02/2021 4:26 pm
ryan.f15
(@ryan-f15)
Estimable Member
Topic starter answered:
RE: Brand new print surface, can't get solid print. Inconsistent Z leveling

Did another print, cleaned surface with 91% IPA before.  Same issue

Posted : 26/02/2021 6:19 pm
ryan.f15
(@ryan-f15)
Estimable Member
Topic starter answered:
RE: Brand new print surface, can't get solid print. Inconsistent Z leveling

Oh, this is an MK2.5 kit from an MK2 kit.

Posted : 26/02/2021 6:20 pm
ryan.f15
(@ryan-f15)
Estimable Member
Topic starter answered:
RE: Brand new print surface, can't get solid print. Inconsistent Z leveling

OK, tried a brand new spool, I'm getting adhesion, and a few good prints but I'm also getting blobbing and some residue on the first layer, like extra material but only on the first thing I print.  I thought that strip at the beginning would clean that, but I also seem to get oozing when the nozzle heats up.  What do I need to do to fix this?

 

This post was modified 3 years ago 4 times by ryan.f15
Posted : 01/03/2021 1:52 am
ryan.f15
(@ryan-f15)
Estimable Member
Topic starter answered:
RE: Brand new print surface, can't get solid print. Inconsistent Z leveling

Anybody?

Posted : 02/03/2021 3:12 am
Page 2 / 2
Share: