Notifications
Clear all

Textured steel sheet issues  

  RSS
Martin mathisen
(@martin-mathisen)
New Member
Textured steel sheet issues

I have a MK3s that came with both style of sheets. I have never gotten the textures sheet to work for me. I have recalibrated from scratch, i have tried adjusting the PINDA-probe, i have done numerous first layer calibrations and i have never ever gotten a print that has not disattached from the plate. On the "normal" steel sheet i have never had any issues. What am i doing wrong? Anyone? 

Posted : 03/10/2020 7:11 pm
cwbullet
(@cwbullet)
Member
RE: Textured steel sheet issues

Have you washed the sheet with Dish soap and scrubbing sponges?   

I recommend Dawn and Greener Clean Sponges.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 03/10/2020 7:32 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Textured steel sheet issues
Posted by: @mm-1

I have a MK3s that came with both style of sheets. I have never gotten the textures sheet to work for me. I have recalibrated from scratch, i have tried adjusting the PINDA-probe, i have done numerous first layer calibrations and i have never ever gotten a print that has not disattached from the plate. On the "normal" steel sheet i have never had any issues. What am i doing wrong? Anyone? 

And if it doesn't want to stick, you can rework the surface with a 1000'er abrasive fleece in circular motions, wash, dry and possibly wipe it with IPA. If necessary, adjust or optimize the Z-firstlayer.

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 03/10/2020 8:26 pm
Martin mathisen
(@martin-mathisen)
New Member
Topic starter answered:
RE: Textured steel sheet issues

Thank you so much for the answers, guys. I am testing both tomorrow. Will let you know how it turned out!

Posted : 03/10/2020 11:34 pm
Share: