[Sticky] The most important links - Original Prusa i3 MK2/S  

  RSS
Jakub Dolezal
(@jakub-dolezal-2)
Admin

Hi,
here is the list of the most important links for your printer:

User Guide

The video is in English

Brand new user guide for the MK2/S
https://www.prusa3d.com/new-user-mk2s/

Online Assembly manual:
-- English -- http://manual.prusa3d.com/c/Original_Prusa_i3_MK2S_kit_assembly
-- Italian -- http://manual.prusa3d.com/c/Assemblaggio_Original_Prusa_i3_MK2S_kit
-- Polish -- http://manual.prusa3d.com/c/Jak_zmontować_zestaw_Original_Prusa_i3_MK2S
-- Spanish -- http://manual.prusa3d.com/c/Kit_de_montaje_Original_Prusa_i3_MK2S
-- German -- http://manual.prusa3d.com/c/Original_Prusa_i3_MK2S_kit_Bauanleitung
-- French -- http://manual.prusa3d.com/c/Original_Prusa_i3_MK2S_Montage_kit

3D printing Handbook:
-- English -- https://www.prusa3d.com/3dhandbookMK2
-- Italian -- https://www.prusa3d.com/downloads/manual/prusa3d_manual_mk2_it.pdf
-- Polish -- https://www.prusa3d.com/downloads/manual/prusa3d_manual_mk2_pl.pdf
-- Spanish -- https://www.prusa3d.com/downloads/manual/prusa3d_manual_mk2_es.pdf
-- German -- https://www.prusa3d.com/downloads/manual/prusa3d_manual_mk2_de.pdf
-- French -- https://www.prusa3d.com/downloads/manual/prusa3d_manual_mk2_fr.pdf

Latest drivers including Slic3r PE and PrusaControl:
https://www.prusa3d.com/drivers

Latest firmware:
https://www.prusa3d.com/drivers/#firmware
How to upgrade firmware: link

Printable printer's parts:
https://www.prusa3d.com/prusa-i3-printable-parts/
Recommended settings are 0.2 Normal and PETG/ABS

Printable 3D models:
https://www.prusa3d.com/drivers
Models are part of the driver's package

Prusa knowledgebase:
http://help.prusa3d.com

Original Prusa i3 MK2/S spare parts:
https://shop.prusa3d.com/en/30-mk2-spare-parts
You must be logged in to see the spare parts,
in case of issues, contact our support

MK2 Knowledge base
https://help.prusa3d.com/l/en?tag=MK2

 

In case you think, something is missing, please let me know below and as always Happy Printing! 😉

This topic was modified 2 years ago by Jakub Dolezal
Assembly manuals / Knowledge Base
The guy behind Prusa assembly manuals......
Posted : 12/01/2018 11:09 am
JoanTabb
(@joantabb)
Moderator

Thanks Jakub
Regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK...
Posted : 03/05/2018 10:42 pm
mike.c22
(@mike-c22)
New Member

How do I get access to the spare parts shop? Says I do not have access

Posted : 03/12/2018 3:11 am
Jakub Dolezal
(@jakub-dolezal-2)
Admin

Mike you need to sign in, also the spare parts are available only to those, who bought the printer.

Assembly manuals / Knowledge Base
The guy behind Prusa assembly manuals......
Posted : 04/12/2018 12:23 pm
heidiaebrown
(@heidiaebrown)
New Member

Hi there, a friend gave me their old / built Prusa i3 MK2. I fired it up, heated the hot end, loaded PLA, did a calibration and all is well. Then, I downloaded a Gcode (Prusa frog and a random cat I found) and tried printing a few times, that first layer is not sticking. Help!?!? Why would calibration work but not the print. Ideas are great, I'm green at this 3d printing stuff. Should I use glue or hairspray? If so, what kind. Second question is creating Gcode files. I use a PC and looks like the Prusa softare is for Mac(?) I might be able to use husbands Mac for the prusa software if needed. Which software do I use to made Gcode files from STLs? Help is much appreciated to point me in the right direction, this is all a little foreign language for me!

Posted : 19/10/2020 7:21 pm
GavBak
(@gavbak)
Active Member

@heidiaebrown

Got my first one recently too, and also would not stick.   Try putting a layer of blue painters tape on the bed where your print it.  Fixed my issues.  Also try using the brim/raft and supports are important.  Sometimes with our older machines I have found that I need to download the STL and slice for my machines settings with a custom profile.

Posted : 13/01/2021 5:51 am
GavBak
(@gavbak)
Active Member

@heidiaebrown

Also, the Windows versions of Prusa Slicer and Prusa3D are available on the Prusa site.

This post was modified 1 week ago by GavBak
Posted : 13/01/2021 5:52 am
Share:

Please Login or Register