Drivers 2.0.0 with support for Original Prusa i3 MK3!
 
Notifiche
Cancella tutti

Drivers 2.0.0 with support for Original Prusa i3 MK3!  

  RSS
Jakub Dolezal
(@jakub-dolezal)
Utenti Admin
Drivers 2.0.0 with support for Original Prusa i3 MK3!

UPDATE: there is a newer version of the driver package https://shop.prusa3d.com/forum/hardware-firmware-and-software-help-f80/drivers-2-1-5-with-slic3r-pe-1-39-2-t17770.html

Hi guys,
starting this release of our driver's package we are adding support for Original Prusa i3 MK3! Support continues for MK2/S/MMU. Included are settings, drivers, printable models, Pronterface and slicing software Slic3r Prusa Edition (stable release) and PrusaControl (beta release).

What is new?

1. New print settings for Original Prusa i3 MK3
Both Slic3r PE and PrusaControl were updated with settings for MK3. Our newest 3D printer includes updated electronics (look for Trinamic2130 drivers in this article) and more rigid frame, which allow great improvement in printing speeds. See below comparison from Slic3r PE on profile NORMAL, where for example travel speed doubled and infill speed went up 3-4x!!!

2. Added sample models for Original Prusa i3 MK3
The package for MK3 includes well-known models from MK2 (Adalinda, Batman, Buddy, Gear Bearing, ...), but our team didn't stop there, the majority of them were tweaked for faster printing times compared to MK2. The bigger and more complex the model is, the faster it prints on MK3, see as an example Castle, which is down to 9 hours from 17 hours!

Also please welcome our newest addition to printable models The Sun Queen Nefertiti 😮
(Author of the model @ScanTheWorld)

3. Drivers for Original Prusa i3 MK3
Package includes a driver for our newest 3D printer, so you can update firmware and use remote control.

4. Slicing software
Slic3r PE included in stable version 1.37.2, for advanced users is available alfa of 1.38.2 on our GitHub (an article will come later).
PrusaControl included in version 0.9.4_415 and is still in beta stage.

-----------------------------------------

Note for Windows users, Slic3r PE has a different launcher for each printer including MK3, shortcut is available on your desktop.

Supported printers:
This driver's package includes latest profiles for MK3/MK2/S/MMU

Download link: http://www.prusa3d.com/drivers
PrusaControl homepage: https://prusacontrol.org
How to install drivers on MacOS: http://manual.prusa3d.com/Guide/Installing+Slic3r+Prusa+Edition+-+macOS/404

In case you encounter any issues with Slic3r Prusa edition, please share them here: https://github.com/prusa3d/Slic3r/issues
Issues with PrusaControl please report directly in the software (Help -> Send feedback) or here: https://github.com/prusa3d/PrusaControl/issues

Assembly manuals

/ Knowledge Base
The guy behind Prusa assembly manuals...

Postato : 01/12/2017 11:13 am
Intrudermax
(@intrudermax)
Eminent Member
Re: Drivers 2.0.0 with support for Original Prusa i3 MK3!

So, are we to assume that Original Prusa i3 mk2 with Zhop is now just Original Prusa i3 mk2?

Postato : 09/12/2017 11:37 pm
Condividi: