Notifications
Clear all

MinTemp Error when Extruder Crosses Specific X Position  

  RSS
K6TJO
(@k6tjo)
Estimable Member
MinTemp Error when Extruder Crosses Specific X Position

I keep getting this MinTemp Error when the extruder crosses a specific X position.  I have checked for loos wires but not sure what else to look for.  Need some suggestions fixing .  Thank you

Video Here:
<iframe src="https://onedrive.live.com/embed?cid=97E3C4B2C3B90E23&resid=97E3C4B2C3B90E23%21750375&authkey=ANK1T1KIjzss3Hc" width="181" height="320" frameborder="0" scrolling="no" allowfullscreen></iframe>
This topic was modified 4 months ago 3 times by K6TJO
...
Posted : 13/06/2021 9:39 pm
K6TJO
(@k6tjo)
Estimable Member
Topic starter answered:
RE: MinTemp Error when Extruder Crosses Specific X Position

Having trouble uploading my video.  Trying again here because I can no longer edit my post for some reason.

...
Posted : 13/06/2021 9:48 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: MinTemp Error when Extruder Crosses Specific X Position

@k6tjo

Prusa gives here some tips on the problem mintemp error: https://help.prusa3d.com/en/article/mintemp-and-mintemp-bed_2169

It is best to check all wires and thermistors step by step with a simple multimeter. The ambient temperature should also not be below 15-20 degrees C.

good luck!

wbr,

Karl

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen....
Posted : 14/06/2021 12:55 pm
Share: