Notifications
Clear all

Thicker layer on same hight in print  

  RSS
EEK
 EEK
(@eek)
New Member
Thicker layer on same hight in print

On my last couple of prints I get a thicker layer on all my prints. The layer is at the same hight in the print (about 15mm). It looks like a layer shift, but its on all sides. I think this started after updating Prusa Slicer. Someone got an idee?

Posted : 30/04/2021 7:20 am
herbert
(@herbert)
Estimable Member
RE: Thicker layer on same hight in print

For me this looks like the seem position, but I cannot really see if and how the layers are positioned or how the objects got printed.

https://help.prusa3d.com/en/article/seam-position_151069/

Posted : 30/04/2021 8:13 am
EEK
 EEK
(@eek)
New Member
Topic starter answered:
RE: Thicker layer on same hight in print

@herbert

thanks for ansering. The lines in the picture are layers. But I think I have solved it, I took a closere look, and at the point where the line happens, my filament sensor got stuck on the frame, and at about 15mm high it snaps lose. So I fixed that and id a test print, it looks like this was the problem.

Posted : 30/04/2021 8:56 am
geekandi liked
Share: