prusament galaxy black and galaxy purple  

  RSS
rlwhite
(@rlwhite)
New Member

mk3s pre built.-After several failures using the above filaments and having tried several temperatuures etc. and different configs inc. pretty v4 -none of which resulted in decent stable prints, I seem to have finally found what works.- my set up is- 225/65 for first layer then 220/ 62.  gyroid infill every layer, nothing else changed exccpt variable layer height for final layers (0.2 to 0.12 which gives excellent  finish to top layers. Results leave a nice 'shine' to finished products. Print Times from 3 hours to 7 hours

I wonder if all 'metal' pla needs this higher temperature- def not humidity(all filaments in dehydrator to 13% at 45deg.before use. would appreciate comments on your experience using  'metal' pla.

Posted : 28/05/2020 11:21 am
manelto
(@manelto)
Estimable Member

Well, i haven't print with galaxy purple, but galaxy black is good for me with nozzle at 215 and bed at 60

Sorry for my poor English. I try to do my best....
Posted : 28/05/2020 11:36 am
Share:

Please Login or Register