Is it possible to print using Delrin  

  RSS
grabnerwg
(@grabnerwg)
Active Member

Have used Delrin before, using long rods and cutting them on my lathe. Delrin works very well in the products I make.

Is it possible to use Delrin filament on the Mini?

 

Walter

 

This topic was modified 2 months ago by grabnerwg
Posted : 05/06/2020 8:24 pm
Strandedbandit
(@strandedbandit)
Trusted Member

i read delrin aka pom aka acetal needs a bed-temperature of 120°C, so probably no go with the mini as we can only heat up to a 100°C. but that's just what i read 🙂

Posted : 12/06/2020 11:19 am
chocki
(@chocki)
Prominent Member

Here you go: https://gizmodorks.com/acetal-3d-printer-filament/

Normal people believe that if it ain’t broke, don’t fix it. Engineers believe that if it ain’t broke, it doesn’t have enough features yet....
Posted : 12/06/2020 1:02 pm
Karl Herbert
(@karl-herbert)
Famed Member
Posted by: @grabnerwg

Have used Delrin before, using long rods and cutting them on my lathe. Delrin works very well in the products I make.

Is it possible to use Delrin filament on the Mini?

 

Walter

 

if you need good friction characteristics I would take a look at this filament: https://www.filamentworld.de/shop/special-filament/abriebfestes-filament/igus-iglidur-i-180-filament-1-75-mm-weiss/

...easier to print as POM.

This post was modified 2 months ago by Karl Herbert
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen....
Posted : 12/06/2020 2:48 pm
Share:

Please Login or Register