Notifications
Clear all
3D Prima Easyprint PLA in Mini
Has anybody had success printing with 3D prima easypriont PLA in the Mini?
I have tried with red and blue filament but get clogging after a minute or too, raising nozzel temp does not help. Have printed 10 kg of the smae filament in my Mk3s without any problem. And all other filaments I have tried in the Mini have printed without problems.
Posted : 17/01/2020 6:07 pm
RE: 3D Prima Easyprint PLA in Mini
Try lowering the speed maybe 30% and try again. I had similar problem with Nylon.
Posted : 10/02/2020 5:16 pm
RE: 3D Prima Easyprint PLA in Mini
Hello,
me use 225 °C / 65 °C and 20% lower speed without problem.
Posted : 12/03/2020 10:26 pm