Notifications
Clear all

Ultimaker Cura profile for Prusa MINI  

  RSS
giancarlo-amodio
(@giancarlo-amodio)
New Member
Ultimaker Cura profile for Prusa MINI

Hi everyone, I would like to use the Ultimaker Cura software with my Prusa MINI, but when I use it, there is no profile for the Prusa MINI, only the models are supported: i3, i3 Mk2, i3 Mk3 / Mk3s and i3 xl .
Can anyone tell me how I can set Cura for the Prusa MINI?
Thank you.

Posted : 15/10/2020 12:10 pm
Robee Shepherd
(@robee-shepherd)
Estimable Member
RE: Ultimaker Cura profile for Prusa MINI

You can download them here: https://help.prusa3d.com/en/guide/how-to-import-profiles-to-cura-4-x-windows-macos_17848#17856

Posted : 18/10/2020 11:12 pm
giancarlo-amodio
(@giancarlo-amodio)
New Member
Topic starter answered:
RISPONDI: Ultimaker Cura profile for Prusa MINI

@robee

I did, but when I then go to print, the print goes out of bed and it also goes wrong.

Posted : 19/10/2020 9:14 am
alan
 alan
(@alan-2)
Eminent Member
RE: Ultimaker Cura profile for Prusa MINI

upgraded to cura 4.9 

cannot add prusa mini  followed instructions

when you add the new printer cura crashes  or atleast it dos for me

work on 4.8 

 

thanks

 

...
Posted : 24/04/2021 12:20 pm
Cipis
(@cipis)
Honorable Member
RE: Ultimaker Cura profile for Prusa MINI

I just tested it with Cura 4.9.0 (Windows). I have no issues with profiles from https://help.prusa3d.com/en/guide/how-to-import-profiles-to-cura-4-x-windows-macos_17848#17856. It is likely some issue with your Cura installation.

...
Posted : 24/04/2021 3:49 pm
alan
 alan
(@alan-2)
Eminent Member
RE: Ultimaker Cura profile for Prusa MINI

ok thanks 

i must have messed up 

thanks

...
Posted : 24/04/2021 5:02 pm
alan
 alan
(@alan-2)
Eminent Member
RE: Ultimaker Cura profile for Prusa MINI

thanks 

sorted unistall cura and reinstalled 

mini just appeared

 

thanks

 

...
Posted : 24/04/2021 5:31 pm
Chris Barnes
(@chris-barnes)
New Member
Ultimaker Cura profile for Prusa MINI

I reviewed this thread and I still have a problem.  My scenario goes like this - Running Ubuntu 20.04 LTS.  Tried using the normal .AppImage file and followed the instructions from https://help.prusa3d.com/en/guide/how-to-import-profiles-to-cura-4-x-windows-macos_17848#17856.&_ga=2.115276800.627010643.1630169805-2071169588.1630007503 and there are no other .json in the directories so that seemed odd.  So I completed all of the steps and even rebooted my machine during the process and I still do not see the Prusa MINI.

Next I thought I would try using the SNAP method but in snap, the .json files are located in a read only directory.  This directory is set as read only by snap and attempting to modify or paste the files proved unproductive.

Can anyone assist with this?

-Chris

Posted : 28/08/2021 6:14 pm
Share: