Notifications
Clear all

Sheet Profile on Mini  

  RSS
AddisonGamingForge
(@addisongamingforge)
New Member
Sheet Profile on Mini

Is there a way to set up sheet profiles for the smooth and textured sheets on the Mini? I really enjoy this feature on the MK3S and got both sheets for the Mini hoping it would have the same functionality. Unless I'm missing something, is the only way to switch back and forth between them is establish your Z-Offset for both and manually change the value when switching between beds?

Posted : 06/04/2020 6:04 am
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Sheet Profile on Mini

As of right now, yes, you have to manually set it every time. It will come in a future firmware update, I think.

Posted : 06/04/2020 7:24 am
burtronix liked
burtronix
(@burtronix)
Estimable Member
RE: Sheet Profile on Mini
Posted by: @matteo-cristini

As of right now, yes, you have to manually set it every time. It will come in a future firmware update, I think.

I was just wondering the same. I just received my Mini with 2 sheets & was hoping there were sheet profiles, like for my MK3S. OK, for now I'll keep my settings in a notebook & change them manually. 

Whatever you find to do with your hands, do with all your might!...
Posted : 30/05/2020 7:22 pm
Gordon W
(@gordon-w)
Reputable Member
RE: Sheet Profile on Mini

https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/223

Posted : 30/05/2020 8:26 pm
burtronix liked
chipmen
(@chipmen)
Active Member
RE: Sheet Profile on Mini

On last firmware 4.2.0. still no profiles for sheets? Every changing sheet i must again and again manually calibrate Z level? Isnt user friendly. MK3S have this function from 3.8.0.

Posted : 05/08/2020 6:01 pm
NoVolumeSwitch
(@novolumeswitch)
Active Member
RE: Sheet Profile on Mini

Come on Prusa, please add this to the next update please.

Posted : 09/08/2020 12:17 pm
peter.t25
(@peter-t25)
New Member
RE: Sheet Profile on Mini

@novolumeswitch

Seconded

Posted : 06/09/2020 12:45 am
Oldschool
(@oldschool)
New Member
RE: Sheet Profile on Mini

Thirdedefeded

 

I can't believe this isn't a bigger issue to people, coming from the mk3s it's a HUGE pain to readjust instead of just choosing a different profile. I hate changing sheets on the mini!

 

 

 

 

Posted : 13/10/2020 4:50 am
Gordon W
(@gordon-w)
Reputable Member
RE: Sheet Profile on Mini

The good news is that it should be coming in the next firmware release. https://github.com/prusa3d/Prusa-Firmware-Buddy/pull/886

Posted : 13/10/2020 9:37 am
burtronix
(@burtronix)
Estimable Member
RE: Sheet Profile on Mini
Posted by: @chris-o

Thirdedefeded

 

I can't believe this isn't a bigger issue to people, coming from the mk3s it's a HUGE pain to readjust instead of just choosing a different profile. I hate changing sheets on the mini!

 

 

 

 

It is a pain, but some of us remember manual bed leveling & non-heated beds. You had to level the bed manually with every print, just in case the room temperature changed. 

Whatever you find to do with your hands, do with all your might!...
Posted : 13/10/2020 1:29 pm
Oldschool
(@oldschool)
New Member
RE: Sheet Profile on Mini
Posted by: @burtronix
Posted by: @chris-o

Thirdedefeded

 

I can't believe this isn't a bigger issue to people, coming from the mk3s it's a HUGE pain to readjust instead of just choosing a different profile. I hate changing sheets on the mini!

 

 

 

 

It is a pain, but some of us remember manual bed leveling & non-heated beds. You had to level the bed manually with every print, just in case the room temperature changed. 

Some of us have been 3D printing for 10+ years but all of this is irrelevant and anecdotal to a feature on an 8-bit board not being available on a 32-bit board from the same manufacturer.

Posted : 13/10/2020 2:31 pm
Simple3D
(@simple3d)
New Member
RE: Sheet Profile on Mini

Looking forward to this firmware upgrade now that I got my mini textured build plate. So much nicer for PETG printing 🙂

Posted : 01/12/2020 2:02 am
Texy
 Texy
(@texy)
Reputable Member
RE: Sheet Profile on Mini

That new firmware sure is a long time coming ;-(

Posted : 05/12/2020 1:39 pm
cwbullet
(@cwbullet)
Illustrious Member
RE: Sheet Profile on Mini

@texy

That I can agree with.  

--------------------
Chuck H
3D Printer Review Blog...
Posted : 05/12/2020 1:59 pm
Gordon W
(@gordon-w)
Reputable Member
RE: Sheet Profile on Mini

@texy

I saw a GitHub comment about 2 or 3 weeks ago that they were hoping to build a release candidate the same day but on the last live stream Jo said he'd asked for some changes to be made to one of the features which had delayed it. I do agree 31st Aug (4.2.1 released) seems like ages. 

Posted : 06/12/2020 8:14 pm
Share: