Prusa MINI making weird beeping noise while printing??
 
Notifications
Clear all

Prusa MINI making weird beeping noise while printing??  

  RSS
rm5400
(@rm5400)
New Member
Prusa MINI making weird beeping noise while printing??

Hey, I got a Prusa mini and have been loving it. However, just today when printing it was making this weird sound, I have never heard before, and couldn't find it online. I tried my best to record it in this video. I appreciate anyone who helps with this. In the video, you can hear it better at the end. The sound is faint, but you should be able to hear it if you turn the volume up. (This is not referring to the normal sound the Prusa mini makes while printing. It is another sound, it's almost as if a robot is talking). 

1E2170FD-5659-4456-A824-552FF05DD463

Posted : 08/09/2021 9:54 pm
cwbullet
(@cwbullet)
Illustrious Member
Hearing

I could not hear it so I suspect that it is not serious.  

--------------------
Chuck H
3D Printer Review Blog...
Posted : 09/09/2021 12:07 am
jcjames_13009
(@jcjames_13009)
Eminent Member
At 0:04 and 0:07?

Hi

If you're talking about "noise" at around 0:04 and 0:07, I have the same. It's when X and Y axis are mooving at the same time (Diagonal mvt). No issue at all on my case

JC

 

Posted : 09/09/2021 8:09 am
cwbullet
(@cwbullet)
Illustrious Member
Sam sound

I re-listened not that you have ID the location.  I concur.  I have heard the same sound in my printers. 

Posted by: @jcjames_13009

Hi

If you're talking about "noise" at around 0:04 and 0:07, I have the same. It's when X and Y axis are mooving at the same time (Diagonal mvt). No issue at all on my case

JC

 

 

--------------------
Chuck H
3D Printer Review Blog...
Posted : 09/09/2021 9:46 am
kymlalu
(@kymlalu)
New Member
Stepper

That sound is from stepper motors. Nothing wrong here.

Posted : 15/09/2021 12:11 pm
Share: