Printer and Print profile setting linked in Prusaslicer?
 
Notifications
Clear all

Printer and Print profile setting linked in Prusaslicer?  

  RSS
MileHigh3Der
(@milehigh3der)
Estimable Member
Printer and Print profile setting linked in Prusaslicer?

Change the nozzle on my PRusa mini and set up new printer and filament profiles to reflect changes I want.  Save the new printer profile.  But if I select it, the print profile goes to a single default option- none of the standard ones are even available to be picked.

Switch the Printer profile back to standard mine- they print profiles (ultradetail, detail, etc) reappear.

?????

I'd like to start with the ultradetail and tweak it?

Why is the printer and print profile so hard linked?  The filament has no effect on the other two settings as far as I can see.

Posted : 07/11/2020 8:43 pm
MileHigh3Der
(@milehigh3der)
Estimable Member
Topic starter answered:
RE: Printer and Print profile setting linked in Prusaslicer?

Nobody?  If I take a standard Mk3 Printer profile and change the nozzle size, I can still use the System Preset print settings.  If I save that change in teh nozzle size, I lose access to all the pint setting System Profiles.  

There is still a header under "Print Settings" for System Presets, but only Custom presets are available.

When I installed PrusaSlicer, I did set up a printer profile for a Printrbot 1303 that I have.  Does that have anything to do with it?

Kind of a pain that if you just say a smaller nozzle, that you lose all the profiles.  I put a 0.15 on my Mini, so it isn't a huge difference in printers and I wanted the usual profiles to start with, but they aren't there...

Posted : 11/12/2020 9:25 am
Share: