LCD Info diplayed - ADD Layer Number printing out of the total number of layers
 
Notifications
Clear all

LCD Info diplayed - ADD Layer Number printing out of the total number of layers  

  RSS
Tenz
 Tenz
(@tenz)
New Member
LCD Info diplayed - ADD Layer Number printing out of the total number of layers

Would it be possible to add some more info in the LCD of the print status?

I really like to use Octoprint but I have to say that I now prefer to use only Prusa LCD to tune a bit velocity temp etc while printing from there.. What I still miss is just where the print is, to compare for instance with the PrusaSlicer sliced model.. the percentage is fine but would also be nice to see the layer number that is printing out of the total number of layers so if something is weird I can go to the layer and see if it is a problem of settings or of the 3D model I can improve for better prints.

Is this a feature I can ask here?

Does it make sense also for someone else?

 

Thanks a lot,

 

Martino.

Posted : 23/06/2021 2:42 pm
Neophyl
(@neophyl)
Famed Member
RE: LCD Info diplayed - ADD Layer Number printing out of the total number of layers

Mini firmware requests should be made here  https://github.com/prusa3d/Prusa-Firmware-Buddy/issues on the mini  firmware github .

Posted : 23/06/2021 2:59 pm
Tenz liked
Tenz
 Tenz
(@tenz)
New Member
Topic starter answered:
RE: LCD Info diplayed - ADD Layer Number printing out of the total number of layers

Thanks will do it there.

 

Happy printing to everyone.

Posted : 24/06/2021 12:49 pm
Share: