Notifications
Clear all

Heatbed electrical connection  

  RSS
adynis
(@adynis)
Eminent Member
Heatbed electrical connection

I've seen a facebook post from Chris Warkocki with a very strange issue: The 2 high-power cables connecting to the heatbed look like are connected on the other side of the PCB, where there are no copper pads, while the copper pads are only touching the screws ....

Question:

Is this the same in all MINIs ? 

 

 

I'm puting here some pictures from Chris' post ( https://www.facebook.com/groups/prusacommunity/permalink/1227584010915662/ )

 

 

This topic was modified 4 years ago 5 times by adynis
Posted : 19/02/2020 12:49 am
adynis
(@adynis)
Eminent Member
Topic starter answered:
RE: Heatbed electrical connection

[ And ... I succeeded to add images as thumbnails ... 👍  ]

This post was modified 4 years ago 2 times by adynis
Posted : 19/02/2020 12:57 am
Crawlerin
(@crawlerin)
Prominent Member
RE: Heatbed electrical connection

IIRC MK3S build manual emphasizes to put screws and cables on the correct side and make cable ends touch the pad. This does not look assembled correctly then. Is it dangerous or not?

This thread with x-ray pics show it mounted under as well. https://forum.prusa3d.com/forum/hardware-firmware-and-software-help/pictures-say-more-than-a-thousand-words/ I will check mine tomorrow.

Posted : 19/02/2020 2:05 am
adynis
(@adynis)
Eminent Member
Topic starter answered:
RE: Heatbed electrical connection

I will not make a summary of the Facebook discussion, but this screenshot seems important 🙂

Posted : 20/02/2020 12:32 am
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Heatbed electrical connection

@adynis

Thanks for the screenshot. I'm sure it's gonna work fine, but it still feels like the wrong way of doing it...

Might be the first mod to design!

Posted : 20/02/2020 6:24 pm
Crawlerin
(@crawlerin)
Prominent Member
RE: Heatbed electrical connection

@matteo-cristini

https://www.prusaprinters.org/prints/22527-mk3-style-heatbed-cover-prusa-mini

He took existing MINI cover to keep the height and re-designed it to be MK3 style cover.

Posted : 20/02/2020 6:31 pm
Crawlerin
(@crawlerin)
Prominent Member
RE: Heatbed electrical connection

https://help.prusa3d.com/en/article/heatbed-connection-resistance-analysis-mini_114422

This post was modified 4 years ago by Crawlerin
Posted : 21/02/2020 11:00 am
Olef liked
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Heatbed electrical connection

@crawlerin

Thanks for the links!

Posted : 21/02/2020 11:07 am
Share: