Notifications
Clear all

Scratch Up - For 3d printing  

  RSS
Mullcom
(@mullcom)
Eminent Member
Scratch Up - For 3d printing

 

Hello.  I starting this topic yeast to have a place to dokument down some information about Scratch up. Its also a learning purposes for me and hopefully other. This topic are maintain over time then i finding some new information i add this to the Topic.

God to know

Segments - at defoult only 24 thats make cirkels in Scratch Up okej. But when you transfer them over to Gcode and print them you can se on the print that cirkels is not perfects. That is what segments is still for. You need to get higher number for this. I have try to find a workaround but no solution found for this at the moment.

Wall thickness -  Wall need to have Thickness 

Plugins

STL exporter - Link
Solidobjekt2 - Link

 

Links

 

 

Common problems

 

 
Posted : 16/01/2020 9:01 am
Mullcom
(@mullcom)
Eminent Member
Topic starter answered:
RE: Scratch Up - For 3d printing

I did a other print and it get OK.  But the other after that it get same problem. It Seams IT Jump big to Right. 

Item that working to print is small and it seams that when i print X,Y axel printing i get this problem. I did reasently update the frameware to lates one and update the software prusaSlicer 2.2. I dident have any issue before this.

 

Posted : 08/04/2020 3:02 pm
Mullcom
(@mullcom)
Eminent Member
Topic starter answered:
RE: Scratch Up - For 3d printing

Not working .

BOX 

 

Working

Holder

 

Attachment removed
This post was modified 4 years ago by Mullcom
Posted : 08/04/2020 3:05 pm
Jerry liked
Mullcom
(@mullcom)
Eminent Member
Topic starter answered:
RE: Scratch Up - For 3d printing

Hi!

 

Now i find out my printer have some problems to go to left. It harder for it to go left then right. I trying to find why but dont see anything. 

Posted : 12/04/2020 10:41 am
Mullcom
(@mullcom)
Eminent Member
Topic starter answered:
RE: Scratch Up - For 3d printing

I fixed my problem.. Se my post here!

https://forum.prusa3d.com/forum/original-prusa-i3-mk3s-mk3-hardware-firmware-and-software-help/crash-detection-on-my-x-axis-on-my-mk3s/#post-207324

Posted : 12/04/2020 12:49 pm
Mullcom
(@mullcom)
Eminent Member
Topic starter answered:
RE: Scratch Up - For 3d printing

Here is a video over when i get this problem solved. 

https://photos.app.goo.gl/tuR1Nd13PYMVKF8j6

and two image of hot to get it loos. 

https://photos.app.goo.gl/8TtFBxVvZ367oTWu6

https://photos.app.goo.gl/Z6D2dfpW63Hw1k7x6

Posted : 12/04/2020 2:21 pm
Share: