Notifications
Clear all

Unofficial Prusa Mini Wait Thread  

Page 88 / 241
  RSS
Crawlerin
(@crawlerin)
Prominent Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @charles-h13

I am printing my first print.  The printer is nice and easy to set up.  I missed one step and had to go back and fix it.  

Did yours arrive with R2 plastic parts? Clamps instead of zipties, hexagonal hole for power cord etc.

Posted : 04/02/2020 8:20 am
xhillb61
(@xhillb61)
Trusted Member
RE: Unofficial Prusa Mini Wait Thread

@munkisquisher, received my Mini 14.12. had to move MINDA slightly that was the only "problem" I faced since then. The printer works great.

 

Cheers

Posted : 04/02/2020 10:04 am
burtronix liked
vbl
 vbl
(@vbl)
Active Member
RE: Unofficial Prusa Mini Wait Thread

Ordered on Oct 14 around 19:30 CET (Prague), #434xx, just got an email that my order has been shipped (DPD CZ). So far, carrier has no info for provided tracking number so it has not been picked up yet.

My father's gonna get his Xmas present, finally. 🙂

(orange, no filament sensor, smooth PEI, PLA Prusa Galaxy Black)

Posted : 04/02/2020 3:42 pm
bobstro
(@bobstro)
Illustrious Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @charles-h13

I am printing my first print.  The printer is nice and easy to set up.  I missed one step and had to go back and fix it.  

Charles, looking forward to your results. I hope you're taking lots of pics or video and notes! I'll be curious to see what the "new wave" looks like inter terms of resolving the QC issues in the first batch. 

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 04/02/2020 3:50 pm
vbl liked
Skewed Perception
(@skewed-perception)
Trusted Member
RE: Unofficial Prusa Mini Wait Thread

That's now two outliers in the mid-3000s range while the bulk progress appears to still be happening around the 2000 border.

Getting antsy about my 35xx order.

Posted : 04/02/2020 4:02 pm
florian-1
(@florian-1)
Active Member
RE: Unofficial Prusa Mini Wait Thread

My printer has arrived, ill be testing tonight.

Posted : 04/02/2020 4:36 pm
vbl liked
bobstro
(@bobstro)
Illustrious Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @ricardos

It's all because coronavirus change rules. If you're shipping internationally, see International Shipping Prohibitions in EMS or DHL.

True or not, I'm using this excuse for everything I'm late with from now on!

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 04/02/2020 5:55 pm
m-roesch
(@m-roesch)
New Member
RE: Unofficial Prusa Mini Wait Thread

@vaclav-blazek

Ordered on the 13th.. still no information about shipping.

This thing will have to be pretty much perfect for me not to be pissed off when it finally shows up.

Posted : 04/02/2020 6:05 pm
LittleNeutrino
(@littleneutrino)
Member
RE: Unofficial Prusa Mini Wait Thread

For those coming in and letting us know of your shipment please make sure to update the spreadsheet.

https://docs.google.com/spreadsheets/d/1cEUO-8AQevqBbD37C25bSPWbb3Lpk6q_-WZuZ0HOIOY

Posted : 04/02/2020 6:12 pm
burtronix liked
adynis
(@adynis)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @littleneutrino

For those coming in and letting us know of your shipment please make sure to update the spreadsheet.

https://docs.google.com/spreadsheets/d/1cEUO-8AQevqBbD37C25bSPWbb3Lpk6q_-WZuZ0HOIOY

PS. Maybe also a column with: "Date when received" would help.

Posted : 04/02/2020 8:33 pm
burtronix liked
florian-1
(@florian-1)
Active Member
RE: Unofficial Prusa Mini Wait Thread

Well, my printer is assembled and working, printed a few simple prints. Working fine so far.

Its definitely the 'R2' version. Comes with 4.0.2 on the USB drive.

First time owning a printer, and i am happy!

This post was modified 4 years ago by florian-1
Posted : 04/02/2020 10:28 pm
burtronix liked
Clemens M.
(@clemens-m)
Noble Member
RE: Unofficial Prusa Mini Wait Thread

Funny - got an email notification about a new post in "Unofficial Prusa Mini Wait Thread". But there was no new post. Going back to English forum > Original Prusa MINI > General discussion, announcements and releases I found this (you have to make the image full screen):

Best regards, Clemens

Mini, i3 MK2.5S, i3 MK4, CClone (Eigenbau)

Posted : 04/02/2020 10:51 pm
Crawlerin
(@crawlerin)
Prominent Member
RE: Unofficial Prusa Mini Wait Thread

@clemens-m

Well, that about matches wait times for MINI. New firmware is promised before end of century, and we should expect new features being added every decade.

Posted : 05/02/2020 1:37 am
Frankincell
(@frankincell)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

@florian-1

Wow, you got that in about 1 day... fast shipping.  Looking forward to some pictures and opinions.

All your filament are belong to us!

Posted : 05/02/2020 2:05 am
ScoutStorm
(@scoutstorm)
Bioluminous
RE: Unofficial Prusa Mini Wait Thread

As an interesting side note, the "shipped" message I received from Prusa had this note at the end:

Note: To keep your goods unharmed during the transport, each package is labelled with a sticker “MONITORED SHIPMENT, IMPACT DETECTOR INSIDE”. However, not all packages are equipped with this sensor. We are selecting random shipments and placing the sensor on the outer surface of the box under the black plastic wrap. Such package also includes instructions on a business card (85 x 55 mm / 3.35 x 2.17 inch). This adds an extra step in making sure your packages arrive as safely as possible. The message is there for the shipping company especially. Therefore, you never need to look for the sensor or contact us if it was not there, that is not necessary.

I wonder if anyone has actually received a shipment with this sensor? Never heard of this.

Posted : 05/02/2020 2:23 am
James
(@james-10)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

@shrikestorm

We get these on cases of sensitive equipment at work, a sticker with an ink cell that ruptures past a certain G level.

Posted : 05/02/2020 2:32 am
ScoutStorm
(@scoutstorm)
Bioluminous
RE: Unofficial Prusa Mini Wait Thread

@munkisquisher

Cool! Is there like a membrane inside that breaks?

Posted : 05/02/2020 4:53 am
Hawwwran
(@hawwwran)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread

It's stressfull to order prusaments these days. Everytime I get the shippment notification, I'm like: "no way it's my MINI!".

I have come here to chew bubblegum and perfect my MINI ... and I'm all out of bubblegum.

Posted : 05/02/2020 9:50 am
Glashaus3D
(@glashaus3d)
New Member
RE: Unofficial Prusa Mini Wait Thread

In case it helps to improve the algorithm, here's more data to it:

Shipped: Order 40966, 13th October, 00:23h, Prusa Mini, black parts, sensor, both sheets, filament sample - notification (PR) from 04. February, 18:50h. Ordered DPD as a courier, shipped with UPS.

The order included some spare parts for my SL1.

I hope for all the "Prusa-teers", who are desperately wait for some news. Keep the faith!

Posted : 05/02/2020 10:09 am
James
(@james-10)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @shrikestorm

@munkisquisher

Cool! Is there like a membrane inside that breaks?

I've never pulled one apart so it could be some tiny pixies with a g meter and a can of red paint. But it's probably a membrane or something equally sensible. 

Posted : 05/02/2020 10:50 am
Page 88 / 241
Share: