Notifications
Clear all

Unofficial Prusa Mini Wait Thread  

Page 48 / 241
  RSS
LittleNeutrino
(@littleneutrino)
Member
RE: Unofficial Prusa Mini Wait Thread

I am just hoping mine actually ships with the Filament Sensor, I added it after the initial order via support chat, and Paypal for payment, and my order form has not been updated to reflect that its on there. but im not really all that worried about it especially being that its external to the device, so if / when it eventually shows up if they dont tack it into the box I can just pop it on there.

Posted : 31/12/2019 2:52 pm
RetroBill
(@retrobill)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

Yea, they know New Years is day off so no reason to work to ship

Posted : 31/12/2019 9:30 pm
LE3D
 LE3D
(@le3d)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

Happy New Year Prusa, sleep off your hangovers so my mini is assembled correctly.

Posted : 31/12/2019 11:13 pm
Crawlerin
(@crawlerin)
Prominent Member
RE: Unofficial Prusa Mini Wait Thread

I received my MINI but assembly was interrupted by celebrating New Year's Eve. Happy New Year everyone! 🍾 🥂 

Posted : 01/01/2020 3:27 am
RetroBill
(@retrobill)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

HAPPY NEW YEAR EVERYBODY!!!

 

MAY THE NEW YEAR BRING EVERYONE THEIR MINI!!!

Posted : 01/01/2020 5:16 am
sjrocky and Sfbrain liked
sjrocky
(@sjrocky)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

Happy New Year! Happy New Mini!

Posted : 01/01/2020 11:21 am
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Unofficial Prusa Mini Wait Thread

I hope this week treats many of well with our Mini orders.  Then again, may it is better to wait till the hangover wears off to make mine.

--------------------
Chuck H
3D Printer Review Blog

Posted : 01/01/2020 3:09 pm
Sfyfe
(@sfyfe)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

Have fun everyone who has their MINI as I live vicariously through you for the first 4 months of the year! Thank you for doing the early-adopter heavy lifting so every printer down the road is a little bit better. Happy New Year!

Posted : 01/01/2020 11:14 pm
MichaelR64
(@michaelr64)
Active Member
RE: Unofficial Prusa Mini Wait Thread
No new deliveries or shipment info yet?
Posted : 02/01/2020 1:45 pm
Texy
 Texy
(@texy)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @k9bub
Posted by: @steve-4

UPDATE ......

Just as a reference for others, my Mini's build date was 17th Dec

It will be interesting to see if any of the issues others were having are also in mine (I read somewhere that a Mini with issues was built on the 4th Dec)

S

Congrats on getting your mini!

 

My mini Build date is Jan 17th 🙂

How do you know - where is this information coming from ?

Posted : 02/01/2020 2:18 pm
BrutusBoots
(@brutusboots)
Trusted Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @texy
Posted by: @k9bub
Posted by: @steve-4

UPDATE ......

Just as a reference for others, my Mini's build date was 17th Dec

It will be interesting to see if any of the issues others were having are also in mine (I read somewhere that a Mini with issues was built on the 4th Dec)

S

Congrats on getting your mini!

 

My mini Build date is Jan 17th 🙂

How do you know - where is this information coming from ?

I believe it's on the printout that shows the results of the hotend/bed QA tests.

Posted : 02/01/2020 2:49 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Unofficial Prusa Mini Wait Thread

Anyone getting shipping info?  

--------------------
Chuck H
3D Printer Review Blog

Posted : 02/01/2020 3:17 pm
Texy
 Texy
(@texy)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @brutusboots
Posted by: @texy
Posted by: @k9bub
Posted by: @steve-4

UPDATE ......

Just as a reference for others, my Mini's build date was 17th Dec

It will be interesting to see if any of the issues others were having are also in mine (I read somewhere that a Mini with issues was built on the 4th Dec)

S

Congrats on getting your mini!

 

My mini Build date is Jan 17th 🙂

How do you know - where is this information coming from ?

I believe it's on the printout that shows the results of the hotend/bed QA tests.

Yeah - for Mini's that have already been delivered, but look at the date quoted!

Posted : 02/01/2020 3:45 pm
MichaelR64
(@michaelr64)
Active Member
RE: Unofficial Prusa Mini Wait Thread

I contacted chat again. .

I ordered at the 15th so i was hoping to get it by now or the coming days.

They could not say when they would ship it, it would probably be in January.

I have to say the way prusa handles this is beyond incompetence. They have had time to scale up their logistics. And just looking at the numbers, just 3 days from launch and they can not say anything more than sometime in January is just pathetic. This way they will not make a dent in the Chinese competition soon.

New orders are still getting it in April. Scale you guys!

Posted : 02/01/2020 7:07 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Unofficial Prusa Mini Wait Thread

@mreitsma

They are not even done shipping the 13th.  A little ways to go to get to the 15th.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 02/01/2020 7:43 pm
morf
 morf
(@morf)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

Hi Folks,

I've also ordered on 15th so I guess I'm gonna be lucky if those orders will be shipped at in second half of the month.

On the other hand I hope that Prusa will draw concussions from the initial batch and pay more attention to the assembly quality control.

They are in  rush, regardless of the initial success currently it sounds like a poisoned chalice. If they don't speed up number of dissatisfied customers will increase due to long delivery time, on the other hand too much rush could potentially introduce mistakes or lower the standards.

Lucky it's my n+1 printer but I'm really looking for receiving a compact and robust machine.

Posted : 02/01/2020 8:58 pm
BrutusBoots
(@brutusboots)
Trusted Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @visual

Hi Folks,

I've also ordered on 15th so I guess I'm gonna be lucky if those orders will be shipped at in second half of the month.

On the other hand I hope that Prusa will draw concussions from the initial batch and pay more attention to the assembly quality control.

They are in  rush, regardless of the initial success currently it sounds like a poisoned chalice. If they don't speed up number of dissatisfied customers will increase due to long delivery time, on the other hand too much rush could potentially introduce mistakes or lower the standards.

Lucky it's my n+1 printer but I'm really looking for receiving a compact and robust machine.

Wishing concussions on them is kind of harsh

Posted : 02/01/2020 9:00 pm
bobstro
(@bobstro)
Illustrious Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @brutusboots

Wishing concussions on them is kind of harsh

I think you hit the nail on the head. I hope it's OK.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 02/01/2020 9:23 pm
morf liked
MileHigh3Der
(@milehigh3der)
Honorable Member
RE: Unofficial Prusa Mini Wait Thread

What I am annoyed about is that for some reason I got the 2nd class citizen/snail-mail notification of the new printer.  I don't know why, but I didn't get an email until late on the 13th/early 14th EU time.  I ordered with in a few hours of getting the email, but I'm way down the down the list.  I know it is New Years, but it seem like the shipments have stalled out.  That Prusa wasn't really forthcoming about what the queue looked like either.

I'm willing to become a supply chain investor if I'm going to be on the front of the line.  If I'm going to be in the back of the line, I'll wait until supply and demand even out and I'm not floating them cash.

 

Posted : 02/01/2020 10:21 pm
morf
 morf
(@morf)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @brutusboots

Wishing concussions on them is kind of harsh

Oh of course I meant conclusions.

Posted : 02/01/2020 10:39 pm
Page 48 / 241
Share: