Notifications
Clear all

Unofficial Prusa Mini Wait Thread  

Page 38 / 239
  RSS
RetroBill
(@retrobill)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

Thanks everyone for updating the spreadsheet!  more orders have shipped, getting closer to my order! I am the 1st order on the 14th

Posted : 17/12/2019 4:30 pm
BrutusBoots
(@brutusboots)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

I ordered almost 10 days after the orders that have shipped.  While I do hate waiting, I feel pretty good that I'll get it sooner than later.

Posted : 17/12/2019 5:19 pm
pingu
(@pingu)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

well, no luck for me...

 

actually waiting for chat to look for a solution. i do not wont to wait until next year for new one. lucky me, i printet a full mini kit from stl allready. but first off all i wount take the demage witout refund and secound i would check prusas statement before i build it. still possibility that the board might be demmaged throught this..

 

whats prusas obsession to this black foil?! it isnt possible to check the box throught it for demage.

Posted : 17/12/2019 5:36 pm
padigree
(@padigree)
Trusted Member
RE: Unofficial Prusa Mini Wait Thread

I also don't understand the packages in black foil. Jo told on the assembly video 'we did this out of paper to reduce plastics' - after he grabbed the 328 different plastic bags out of the box and while sending the box is covered in tons of foil. Good job.

 

Edit: I know that's not exactly his spoken word, but may someone also noticed this. 

 

Btt, I'm sorry. I know that issue in my own, not with printers but with different, sometimes very expensive stuff with extreme leadtime. Keep us posted.. 

This post was modified 2 years ago by padigree
It’s better to give than to receive. Especially advice....
Posted : 17/12/2019 5:40 pm
oopsitsaflame
(@oopsitsaflame)
Active Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @pingu

whats prusas obsession to this black foil?! it isnt possible to check the box throught it for demage.

could the black foil be from the shipping company after they "oopsied" your  package?

 

 

Posted : 17/12/2019 9:56 pm
JoanTabb
(@joantabb)
Moderator
RE: Unofficial Prusa Mini Wait Thread

I was grateful for the Black film wrapping after the delivery company left my package on the back doorstep in the rain!

the package was drenched, but the contents were dry!
Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK...
Posted : 17/12/2019 10:24 pm
Olef
 Olef
(@olef)
Honorable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @oopsitsaflame
Posted by: @pingu

whats prusas obsession to this black foil?! it isnt possible to check the box throught it for demage.

could the black foil be from the shipping company after they "oopsied" your  package?

 

 

All Prusa shipments are wrapped in the black film. Gives good protection and conceals the contents.

Posted : 17/12/2019 10:45 pm
sjrocky
(@sjrocky)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

Shipped orders creeping closer!

Posted : 18/12/2019 2:03 am
Originalself
(@jonathan-t12)
New Member
RE: Unofficial Prusa Mini Wait Thread

Well DHL is the worst shipper available. My printer was supposed to be delivered days ago and customer support is useless. I hope everyone else is having less problems.

Posted : 18/12/2019 7:21 am
a.steinel
(@a-steinel)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @a-steinel

So, there is a hold up for black/pei+txt/sensor, none of them shipped according to the list.

Finally, first order(s) also shipped.

Posted : 18/12/2019 8:04 am
a.steinel
(@a-steinel)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @a-steinel
Posted by: @a-steinel

So, there is a hold up for black/pei+txt/sensor, none of them shipped according to the list.

Finally, first order(s) also shipped.

... and now mine is shipped too. Yeah

Posted : 18/12/2019 1:36 pm
RetroBill
(@retrobill)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

Yes I feel my order getting closer 🙂

Posted : 18/12/2019 2:53 pm
RetroBill
(@retrobill)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

Yes I feel my order getting closer 🙂

Posted : 18/12/2019 2:53 pm
cwbullet
(@cwbullet)
Topic starter answered:
RE: Unofficial Prusa Mini Wait Thread

@k9bub

Yup.  Getting excited.  

--------------------
Chuck H
3D Printer Review Blog...
Posted : 18/12/2019 3:06 pm
Vincent
(@vincent)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

I ordered two Minis a few hours after the announcement.  I also ordered MK3S and accessories during the Black Friday promotion.  People who ordered after me in both scenarios are getting shipping notifications.  Two days left before PR goes on a holiday break.  It’s coming down to the wire.

Posted : 18/12/2019 3:55 pm
DenS
 DenS
(@dens)
RE: Unofficial Prusa Mini Wait Thread

@vincent-v4

Same situation here, people after me has already got their Mini.

I had contact with support, they said it was at packing station and it would ship today. But it's already 17:20 in prague, don't think it will be sent today.

Posted : 18/12/2019 4:26 pm
Benji
(@benji)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @dennis-s12

@vincent-v4

Same situation here, people after me has already got their Mini.

I had contact with support, they said it was at packing station and it would ship today. But it's already 17:20 in prague, don't think it will be sent today.

I didn't get a shipping confirmation until 18:00 in Prague. So I wouldn't worry about it just yet. 

BTW, I am printing my second print on my Mini as I type. Really happy with it. The wait will be worth it!

Prusa Mini Silicone Bed Leveling Mod: https://bbbenji.github.io/PMSBLM/...
Posted : 18/12/2019 4:29 pm
DenS liked
Duncan_
(@duncan_)
New Member
RE: Unofficial Prusa Mini Wait Thread

@dennis-s12

I've had orders from Prusa where I would receive my shipping notice at around 22:00 Prague time, so there is time left.

Posted : 18/12/2019 4:31 pm
RetroBill
(@retrobill)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

Looks like they shipped most if not all printers ordered on the 12th and they are shipping printers from the 13th. So I am next on the list! 1st order on the 14th! SHIP SHIP SHIP!!!

 

I want to get my first 3D printer!!!

Posted : 18/12/2019 4:44 pm
matthew.g34
(@matthew-g34)
Active Member
RE: Unofficial Prusa Mini Wait Thread

Sigh, although I can see the printer in my order queue, the number isn't in the spreadsheet.  There are a bunch in the middle that don't have valid numbers 🙁

Posted : 18/12/2019 4:49 pm
Page 38 / 239
Share: