Notifications
Clear all

Unofficial Prusa Mini Wait Thread  

Page 35 / 238
  RSS
RetroBill
(@retrobill)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

Looking at all the BLUE on the shipped spread sheet I should get mine in January. No Christmas present for me 🙁

 

Posted : 13/12/2019 4:42 pm
Benji
(@benji)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @k9bub

Looking at all the BLUE on the shipped spread sheet I should get mine in January. No Christmas present for me 🙁

 

I am surrounded by blue... It's tough...

Prusa Mini Silicone Bed Leveling Mod: https://bbbenji.github.io/PMSBLM/...
Posted : 13/12/2019 4:49 pm
Benji
(@benji)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @asdf-tgz
Posted by: @k9bub

Looking at all the BLUE on the shipped spread sheet I should get mine in January. No Christmas present for me 🙁

 

I am surrounded by blue... It's tough...

I have no idea how you did it... But mine just got shipped after you replied to my post! Thank you!

Prusa Mini Silicone Bed Leveling Mod: https://bbbenji.github.io/PMSBLM/...
Posted : 13/12/2019 5:02 pm
cwbullet
(@cwbullet)
Illustrious Member
Topic starter answered:
RE: Unofficial Prusa Mini Wait Thread

Come on - please ship more today so I can move way up the list.  

--------------------
Chuck H
3D Printer Review Blog...
Posted : 13/12/2019 5:55 pm
RetroBill
(@retrobill)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @asdf-tgz
Posted by: @asdf-tgz
Posted by: @k9bub

Looking at all the BLUE on the shipped spread sheet I should get mine in January. No Christmas present for me 🙁

 

I am surrounded by blue... It's tough...

I have no idea how you did it... But mine just got shipped after you replied to my post! Thank you!

I told them you have been waiting long enough and they said they would ship yours 🙂

Posted : 13/12/2019 6:08 pm
Benji
(@benji)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @k9bub
Posted by: @asdf-tgz
Posted by: @asdf-tgz
Posted by: @k9bub

Looking at all the BLUE on the shipped spread sheet I should get mine in January. No Christmas present for me 🙁

 

I am surrounded by blue... It's tough...

I have no idea how you did it... But mine just got shipped after you replied to my post! Thank you!

I told them you have been waiting long enough and they said they would ship yours 🙂

You're a good man k9.

Prusa Mini Silicone Bed Leveling Mod: https://bbbenji.github.io/PMSBLM/...
Posted : 13/12/2019 6:16 pm
Chris Molieri
(@chris-molieri)
Active Member
RE: Unofficial Prusa Mini Wait Thread

I'm order 43912, so I'm going to be waiting for some time. I'm one of the ones with a filament sensor, and I ordered on the 15th, so those probably won't work in my favor. This is my first Prusa machine, so I'm really excited!

This post was modified 2 years ago by Chris Molieri
Posted : 13/12/2019 7:26 pm
K7ZPJ
(@k7zpj)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

The upside of waiting  longer to get your printer is that,  the wait for the network features to be implemented will be a bit shorter.

Posted : 13/12/2019 7:32 pm
Chris Molieri
(@chris-molieri)
Active Member
RE: Unofficial Prusa Mini Wait Thread

@bruce-p4

True, and also all the tutorials will be out by then as well. I live in the US, so here's hoping it'll arrive before the end of December!

Posted : 13/12/2019 7:34 pm
Benji
(@benji)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @bruce-p4

The upside of waiting  longer to get your printer is that,  the wait for the network features to be implemented will be a bit shorter.

The more you wait now, the less you wait later. You do have a point there. 

Prusa Mini Silicone Bed Leveling Mod: https://bbbenji.github.io/PMSBLM/...
Posted : 13/12/2019 7:34 pm
justin.s18
(@justin-s18)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

I looked in my account to check today and the order status changed to cancelled, what the heck?

I'll be extremely annoyed if I get sent to the back of the list, I ordered hours after the announcement.

Posted : 13/12/2019 10:16 pm
justin.s18
(@justin-s18)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @justin-s18

I looked in my account to check today and the order status changed to cancelled, what the heck?

I'll be extremely annoyed if I get sent to the back of the list, I ordered hours after the announcement.

Actually looks like I was never actually charged, even though the invoice clearly says 'paid in full do not pay'.  So instead of figuring that out two months ago they cancelled the order without contacting me.  I hope they can sort it out.

Posted : 13/12/2019 10:27 pm
RetroBill
(@retrobill)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @justin-s18
Posted by: @justin-s18

I looked in my account to check today and the order status changed to cancelled, what the heck?

I'll be extremely annoyed if I get sent to the back of the list, I ordered hours after the announcement.

Actually looks like I was never actually charged, even though the invoice clearly says 'paid in full do not pay'.  So instead of figuring that out two months ago they cancelled the order without contacting me.  I hope they can sort it out.

Yup the same thing happened to me when I just check the status. When I ordered I checked they charged my credit card. So I paid and they cancelled my order WTF?????

 

 

Posted : 14/12/2019 2:37 am
cwbullet
(@cwbullet)
Illustrious Member
Topic starter answered:
RE: Unofficial Prusa Mini Wait Thread

Mine was similar and it partially shipped.  

--------------------
Chuck H
3D Printer Review Blog...
Posted : 14/12/2019 4:49 am
LH
 LH
(@lh)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

Mine also say cancelled!  What is going on Prusa???  

Posted : 14/12/2019 6:29 am
a.steinel
(@a-steinel)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

So, there is a hold up for black/pei+txt/sensor, none of them shipped according to the list.

Posted : 14/12/2019 8:04 am
Strankler
(@strankler)
Active Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @k9bub
Posted by: @justin-s18
Posted by: @justin-s18

I looked in my account to check today and the order status changed to cancelled, what the heck?

I'll be extremely annoyed if I get sent to the back of the list, I ordered hours after the announcement.

Actually looks like I was never actually charged, even though the invoice clearly says 'paid in full do not pay'.  So instead of figuring that out two months ago they cancelled the order without contacting me.  I hope they can sort it out.

Yup the same thing happened to me when I just check the status. When I ordered I checked they charged my credit card. So I paid and they cancelled my order WTF?????

 

 

When I look into my orders,  newest stauts is always on top, so in this case, your current status is "payment accepted".

Posted : 14/12/2019 9:28 am
Minos
(@minos)
Active Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @crawlerin
Posted by: @bobstro
Notice it seems they're officially doing a 2-step filament warmup: 170C before mesh bed leveling, then up to full temp.

Yeah, that's rather neat. Other things I have noticed so far:

  • No power loss protection - but that was written in announcement blog post, it will come later with FW update
  • No XYZ calibration for frame skew - not sure if that's because it's not needed due to construction, or not implemented yet. Points for induction probe are on heatbed.
  • There is this initial confusion as to which button is highlighted on display - the white one or the blue one?
  • 9 gummy bears. Manual clearly documents and requires 10. Should we ask to ship one extra mini bear as part of warranty claim? 🤔

I was wondering have you tried running it over simple calibration tests? For example the stringing test bellow?

https://www.thingiverse.com/thing:2080224

I am curious on how it handles stringing being their first bowden printer and Slicer/PrusaSlicer having no bowden related features such as coasting. Can you test if they have added linear advance on the mini's firmware?

 

Posted : 14/12/2019 11:19 am
aztecgecko
(@aztecgecko)
Active Member
RE: Unofficial Prusa Mini Wait Thread

Can some repost the Google spreadsheet link and info on how I can find my order status?

Posted : 14/12/2019 1:17 pm
a.steinel
(@a-steinel)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @billdifabio

Can some repost the Google spreadsheet link and info on how I can find my order status?

Sure thing:

https://docs.google.com/spreadsheets/d/1cEUO-8AQevqBbD37C25bSPWbb3Lpk6q_-WZuZ0HOIOY/edit#gid=0

https://shop.prusa3d.com/en/order-history

Posted : 14/12/2019 1:58 pm
Page 35 / 238
Share: