Unofficial Prusa Mini Wait Thread  

Page 204 / 224
  RSS
Kev
 Kev
(@kev-6)
Active Member
Posted by: @lee3d

So are they falling behind in shipment or are they on schedule cant really tell honestly.

It's hard to tell and does depend on your configuration and your location as they appear to be shipping in batches to countries etc but I would say they're around 2 weeks behind their shipping table. 

Mine was supposed to ship "from 31st August" it arrived on I think the 23rd September. I did order right at the end of my week window so I would have expected shipping to be around the 5th September rather than the 31st so taking that into account about two weeks behind. They may have caught up a bit since then though.
Posted : 03/10/2020 10:11 pm
aaron.cornish
(@aaron-cornish)
Eminent Member

They have just updated the shipping table.

They have moved my order window from the W/C 5th to W/C 12th October 🙁

Posted : 04/10/2020 10:02 am
Hektopascal
(@hektopascal)
Active Member

Yep @aaron-cornish,

Same for my order. 

I ordered August 24th. I am checking the order status page from time to time, so I know that my order was labeled with from October 12th and now it is one week later according to the information page(from October 19th).

🙄

Posted : 04/10/2020 9:46 pm
Gabi
 Gabi
(@gabi-2)
Active Member

I have just received the mail about the shipment!!!! It was requested on August the 10th with PEI, Textured and filament sensor (and some filament).

I have gone to update the excell but my entry has disappeared an some weird columns are there, could someone roll back it to a previous version in order to be able to update it?

Thanks in advance

Posted : 05/10/2020 1:50 pm
aaron.cornish
(@aaron-cornish)
Eminent Member

Seems like they may be more than week behind then.

Doh! Oh well, an extra week to continue learning Fusion 360

Posted : 05/10/2020 2:31 pm
Gabi
 Gabi
(@gabi-2)
Active Member

@aaron-cornish

I have done the same... I have several designs in fusion waiting to be tested :-D. At least we have learned to more or less desing, now it's time to learn to print :-D.

 

Posted : 05/10/2020 2:33 pm
Zeptran
(@zeptran)
Active Member
Posted by: @zeptran
I hope this helps some people to add my order to the list. 

Ordered mine on 8th August with the sensor and both sheets in orange shipping to Germany.
I added after the order was placed 2 spools if filament.
Shipping is with DPD.

Nothing so far on shipping or anything.

Last 4 digits of the order number are 0142.
If anyone could add my order to the spreadsheet that would be great, I will make an update once I hear from them.

Hopefully everyone is well at prusa, looking into the news there are a lot of new cases there....
Hope everyone stays safe out there

Well I looked into it again and I ordered on the 7th August. 

But hey the live chat said it will be shipped in the beginning of this week so yeah the wait kinda continues 

Posted : 05/10/2020 2:34 pm
Sami Viitanen
(@sami-viitanen)
New Member

My order from Aug 8th is still pending, with same options as gabipallares had (except only filament sample). But maybe it's different shipping methods (DHL for me). And yeah, sheet is messed up.

This post was modified 5 months ago by Sami Viitanen
Posted : 05/10/2020 3:42 pm
Moaeed Sajid
(@moaeed-sajid)
Active Member

@gabipallares

Spreadsheet has been repaired.  Does your order end in 66181?

Posted : 05/10/2020 5:18 pm
lee3d
(@lee3d)
Active Member

@gabipallares

What was your order number? 

Mine isn't messed up. 

Posted : 06/10/2020 1:23 am
JK Proto
(@jk-proto)
Active Member

I just canceled my mini order and upgraded it to a mk3s (deleted from the spreadsheet)

Posted : 06/10/2020 8:55 am
aaron.cornish
(@aaron-cornish)
Eminent Member
Posted by: @lee3d

@gabipallares

What was your order number? 

Mine isn't messed up. 

There was a bunch of rows from the beginning of August that had been overwritten with random data, so it was only messed up for orders that were on those rows

Posted : 06/10/2020 9:06 am
Zeptran
(@zeptran)
Active Member
Posted by: @zeptran
Posted by: @zeptran
I hope this helps some people to add my order to the list. 

Ordered mine on 8th August with the sensor and both sheets in orange shipping to Germany.
I added after the order was placed 2 spools if filament.
Shipping is with DPD.

Nothing so far on shipping or anything.

Last 4 digits of the order number are 0142.
If anyone could add my order to the spreadsheet that would be great, I will make an update once I hear from them.

Hopefully everyone is well at prusa, looking into the news there are a lot of new cases there....
Hope everyone stays safe out there

Well I looked into it again and I ordered on the 7th August. 

But hey the live chat said it will be shipped in the beginning of this week so yeah the wait kinda continues 

Just got the Email that my Order Status has changed to Shipped.

Now i just need to finde the Tracking number

Posted : 06/10/2020 10:27 am
aaron.cornish
(@aaron-cornish)
Eminent Member

@zeptran

Awesome. Glad it is on the way 🙂

Posted : 06/10/2020 4:26 pm
lee3d liked
lee3d
(@lee3d)
Active Member

They just updated the shipping again. Mine supposed to ship next week it. Fingers crossed 

Posted : 06/10/2020 5:34 pm
aaron.cornish
(@aaron-cornish)
Eminent Member

@lee3d

Got excited that mine was going to be set back to this week, sadly not. Estimated w/c 12th.

They are still shipping orders from Mid July !

 

Posted : 06/10/2020 5:38 pm
lee3d
(@lee3d)
Active Member

@aaron-cornish

I dont see how there still shipping mid July orders unless they haven't update that part. Or there someone that order more then one 

Posted : 06/10/2020 5:41 pm
Zeptran
(@zeptran)
Active Member

@lee3d

I could see if something else that got ordered in the same order is maybe out of Stock?

Like Filament or something like that

Posted : 06/10/2020 5:43 pm
Gabi
 Gabi
(@gabi-2)
Active Member

@moaeedsajid

No it's the  64723 ones. The mini, galaxy silver + prusa orange petg. Last week I added by Galaxy black pla and some PETF tubes to the order. It was shipped on monday at 13:41 and I can see that yesterday at 16:47 sent to a depo in Praga, so it looks like the trip is not going to be very fast.. I will keep you posted.

I have tried to edit the spreadsheet but I couldn't.

Posted : 06/10/2020 11:27 pm
aaron.cornish
(@aaron-cornish)
Eminent Member

@gabipallares

I have updated it for you. Hope your printer is with you soon

Aaron

Posted : 07/10/2020 9:39 am
Page 204 / 224
Share:

Please Login or Register