Notifications
Clear all

Unofficial Prusa Mini Wait Thread  

Page 129 / 239
  RSS
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @hawwwran

It's starting to smell like quarantine here in CZ. All schools closed today. All events for more than 100 people banned.

Update from Lombardy: all schools closed until April; pretty much every event/exam has been banned, and we can't leave our home city, let alone the region (this applies for all the region). It's recommended not to leave the house unless it's really necessary. Shipments have not been blocked though (yet! - crosses fingers), hope my Mini makes it!

Posted : 10/03/2020 11:29 am
Frankincell
(@frankincell)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

@kropexx

The printer comes with all the parts needed.  No need to print anything to assemble and use the printer.

You can see some of the steps from when mine arrived here.

https://forum.prusaprinters.org/forum/general-discussion-announcements-and-releases/unofficial-prusa-mini-wait-thread/paged/95/#post-190721

 

All your filament are belong to us!...
Posted : 10/03/2020 1:12 pm
BeeMac
(@beemac)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

@matteo-cristini

I knew this would happen right before my printer was scheduled to ship as I mentioned last week 

Posted : 10/03/2020 2:27 pm
Frankincell
(@frankincell)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

So, I kept an eye on that print and any time I increased the speed above 50% it started ripping up the previous layer.

And then I re-read the name of the filament I was using...  Prusament PETG Prusa Galaxy Black

Face-Palm....   So...  Everyone....  Don't use PETG with PLA settings on your printer...  I feel so dumb...  lol

Damn this is an awesome hobby!

I'm gonna print something AWESOME with that PETG tonight!   I need to look through my print queue to see what would look best.

All your filament are belong to us!...
Posted : 10/03/2020 3:52 pm
Clemens M.
(@clemens-m)
Prominent Member
RE: Unofficial Prusa Mini Wait Thread

@frankincell

I am sure - everybody had that issue - printing with the wrong material settings - and it takes time to find the reason for this strange behaviour.

Best regards, Clemens

Posted : 10/03/2020 4:23 pm
kropexx
(@kropexx)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

@frankincell

thank you again 🙏🏻

I hope that this virus epidemic will not delay the delivery😅

Posted : 10/03/2020 4:30 pm
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread

@whmacintosh

oh don't say that 🙁

Posted : 10/03/2020 6:04 pm
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread

I hope that this virus epidemic will not delay the delivery😅

Me too -  I think we've been waiting enough!

If there's going to be another delay, by the time we'll get our printers a Mini MK2S will be out already 😛

Posted : 10/03/2020 6:06 pm
burtronix
(@burtronix)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @matteo-cristini

I hope that this virus epidemic will not delay the delivery😅

Me too -  I think we've been waiting enough!

If there's going to be another delay, by the time we'll get our printers a Mini MK2S will be out already 😛

The XL will be first. 

Whatever you find to do with your hands, do with all your might!...
Posted : 10/03/2020 6:17 pm
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread

@burtronix

Of course. I see the timeline as something like this: 

1. this winter the new XL is released

2. early 2021: i3 MK4

3. late 2021: Mini MK2/s upgrade

4. 2022: I finally receive my mini after norther italy is open again and free from the virus

 

I'm just kidding of course XD or at least I hope so

Posted : 10/03/2020 7:09 pm
burtronix
(@burtronix)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

@matteo-cristini

The long days  & bright sun of summer should free you from the threat of virus. Hopefully, the wheels of government will turn fast enough to also release you from isolation. 😎 

Whatever you find to do with your hands, do with all your might!...
Posted : 10/03/2020 7:34 pm
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread

@burtronix

Oh but I'm fine with having to stay at home. I have plenty of things to do here, and I'm not that kind of guy who is always out and around anwways - though I'd enjoy a ride with my road bike every now and then.

This also means that if my mini manages to get here in time, I'll be at home for sure to assemble it right away 🙂

My order should be shipped soon, I can't wait!

Posted : 10/03/2020 8:32 pm
Hawwwran
(@hawwwran)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread

There were three orders marked as shipped in our spreadsheet yesterday. All from the 17th10.

There was one order marked as delivered.

There was one order (346617) marked as pending from shipped. For an unknown reason.

https://docs.google.com/spreadsheets/d/1cEUO-8AQevqBbD37C25bSPWbb3Lpk6q_-WZuZ0HOIOY

I have come here to chew bubblegum and perfect my MINI ... and I'm all out of bubblegum....
Posted : 11/03/2020 9:59 am
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread

I asked chat support about it and for right now they don't plan to stop shipping to northern italy. Hope it doesn't get worse. I really can't wait!

Posted : 11/03/2020 2:41 pm
cwbullet
(@cwbullet)
Topic starter answered:
RE: Unofficial Prusa Mini Wait Thread

I hope this COVID thing is done soon,  Not just for the Prusa, but for the folks who catch it,  

--------------------
Chuck H
3D Printer Review Blog...
Posted : 11/03/2020 2:46 pm
AZ_TIM liked
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @charles-h13

I hope this COVID thing is done soon,  Not just for the Prusa, but for the folks who catch it,  

Wise words.

Posted : 11/03/2020 3:21 pm
BeeMac
(@beemac)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

@charles-h13

6-8 months 

Posted : 11/03/2020 3:25 pm
bobstro
(@bobstro)
Illustrious Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @charles-h13

I hope this COVID thing is done soon,  Not just for the Prusa, but for the folks who catch it,  

I'm all for shortening the queue for the Mini, but not that way!

My notes and disclaimers on 3D printing and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan...
Posted : 11/03/2020 3:30 pm
Oxygen
(@oxygen)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread

I have very good news, I have gotten the famous email stating the Mini has been shipped 😎 scheduled delivery (UPS) by Friday. 🤣 

My order in the google sheet has been marked shipped.

Mini with FW:4.3.4 + SuperPINDA + Bondtech Heatbreak + PC4-M8 couplers + 1 piece boden...
Posted : 11/03/2020 4:10 pm
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread

@oxygen

Awesome! 

When did you order yours?

Posted : 11/03/2020 4:18 pm
Page 129 / 239
Share: