Notifications
Clear all

Unofficial Prusa Mini Wait Thread  

Page 111 / 238
  RSS
Tomas T
(@tomas-t)
Active Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @alex-k7

@tischan

Congratulations 🙂

I tried everything. In Slicer 2.1.1 the Mini doesn´t appear...

I uninstalled everything and reinstalled the lastest Version of Slicer (2.1.1)

Damn! 🙁

Thanks!

I guess you already check this, but the path for me was Configuration->Configuration Wizard->Prusa FFF->Mini Family (Orginal Prusa Mini) picture of mini and below I can select nozzel size.  I have the PrusaSlicer 2.1.1 win64 version 201912101512. Link

Posted : 19/02/2020 9:59 am
Texy
 Texy
(@texy)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @alex-k7

@tischan

Congratulations 🙂

I tried everything. In Slicer 2.1.1 the Mini doesn´t appear...

I uninstalled everything and reinstalled the lastest Version of Slicer (2.1.1)

Damn! 🙁

....you can install prusaslicer more than once - just choose a different folder, and switch between versions as you need.

Texy

Posted : 19/02/2020 11:19 am
Linor
(@linor)
New Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @linor

My order from the 14th still hasn't shipped (343528), I wonder if that's due to me choosing black as I see a couple of other unshipped orders in black before mine while the orange ones after me in the sheet have started shipping.

According to the chat, that's just a coincidence / related to the community sheet. There's apparently no problem with black printer parts and he hopes all orders from the 14th would be shipped this week. Guess I'll just wait a little longer.

 

Posted : 19/02/2020 12:21 pm
Julian
(@julian-3)
Trusted Member
RE: Unofficial Prusa Mini Wait Thread

I'm just a couple orders after you, two printers with orange parts, and mine haven't shipped yet either.

Posted : 19/02/2020 1:04 pm
burtronix
(@burtronix)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @linor
Posted by: @linor

My order from the 14th still hasn't shipped (343528), I wonder if that's due to me choosing black as I see a couple of other unshipped orders in black before mine while the orange ones after me in the sheet have started shipping.

According to the chat, that's just a coincidence / related to the community sheet. There's apparently no problem with black printer parts and he hopes all orders from the 14th would be shipped this week. Guess I'll just wait a little longer.

 

It's like a conversation I heard in a restaurant once. 

"We were seated before them, but they were served first. I ordered the special. Isn't the special faster to serve?"

"Usually, but today it's really popular & we have more coming out soon. Lots of other people are waiting too."

Whatever you find to do with your hands, do with all your might!...
Posted : 19/02/2020 1:21 pm
bobstro liked
RetroBill
(@retrobill)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

@milehigh3der

Yes it will

Posted : 19/02/2020 1:24 pm
cwbullet
(@cwbullet)
Illustrious Member
Topic starter answered:
RE: Unofficial Prusa Mini Wait Thread

@linor

It could be.

--------------------
Chuck H
3D Printer Review Blog...
Posted : 19/02/2020 2:12 pm
cwbullet
(@cwbullet)
Illustrious Member
Topic starter answered:
RE: Unofficial Prusa Mini Wait Thread
Posted by: @clemens-m

@mreitsma

I would like to understand the masterplan - which criteria do they use to plan shipping of the minis?

However - in some time (no one nows how long that takes) I will be a proud user of a MINI.

Best regards, Clemens

Don't hurt yourself.  I tried to figure it out.  Too complex.  

--------------------
Chuck H
3D Printer Review Blog...
Posted : 19/02/2020 2:14 pm
Julian
(@julian-3)
Trusted Member
RE: Unofficial Prusa Mini Wait Thread

My printers finally shipped 🙂

Posted : 19/02/2020 3:15 pm
Oxygen liked
RetroBill
(@retrobill)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

Guys,

 

Firmware 4.0.3 was just released! Mini fixes included !

Posted : 19/02/2020 3:32 pm
Rick
 Rick
(@rick)
Trusted Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @julianr

My printers finally shipped 🙂

When did you order?

Posted : 19/02/2020 4:43 pm
Julian
(@julian-3)
Trusted Member
RE: Unofficial Prusa Mini Wait Thread

Fairly late on Oct 14th.

Posted : 19/02/2020 4:49 pm
Rick liked
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @matteo-cristini

Either way, I'm gonna try to stay away from the forum and the shipping info for a while, maybe the wait will feel a little easier...

See you guys in march! Bye 🖐️ 

Nah, I don't feel like staying away anymore... I'm learning so much from this thread 😊 

Posted : 19/02/2020 4:58 pm
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Unofficial Prusa Mini Wait Thread

This reddit post is quite concerning though, do you think it was a one-time error or is it like this on every printer?

Someone might need to tell Prusa!

Posted : 19/02/2020 5:00 pm
cwbullet
(@cwbullet)
Illustrious Member
Topic starter answered:
RE: Unofficial Prusa Mini Wait Thread

@matteo-cristini

Not so sure.  I hope Prusa is reviewing that thread.  

--------------------
Chuck H
3D Printer Review Blog...
Posted : 19/02/2020 6:02 pm
Crawlerin
(@crawlerin)
Prominent Member
RE: Unofficial Prusa Mini Wait Thread

There's also a big FB discussion about it. I hope we get some response telling us to panic or not. Even if they did their math and it's not unsafe from electrical point of view, for the sake of good sleep and community goodwill they should inform about potential issue, give a guide on how to make it safer and redesign parts to fit connectors the right way.

Posted : 19/02/2020 6:38 pm
LittleNeutrino
(@littleneutrino)
RE: Unofficial Prusa Mini Wait Thread

@k9bub

Too bad it fully disables the network adapter, so we dont even have printer stats anymore while we wait for the new interface :'(

Posted : 19/02/2020 6:48 pm
Icephoenix
(@icephoenix)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread
Posted by: @matteo-cristini

This reddit post is quite concerning though, do you think it was a one-time error or is it like this on every printer?

Someone might need to tell Prusa!

I would suggest at least changing the screws to brass ones. Better would be designing a new cover and connecting the wires on the top. We had motor terminals blowing up because of this flaw once.

Posted : 19/02/2020 7:08 pm
RetroBill
(@retrobill)
Estimable Member
RE: Unofficial Prusa Mini Wait Thread

@littleneutrino

So if I don't use the network adapter then is 4.0.3 ok to use?

Posted : 19/02/2020 7:34 pm
James
(@james-10)
Eminent Member
RE: Unofficial Prusa Mini Wait Thread

@k9bub

You can always roll back if you have issues. Or wait a couple of days for others to guinea pig it for you.

Posted : 19/02/2020 8:01 pm
Page 111 / 238
Share: