Unofficial Prusa Mini Wait Thread  

Page 109 / 146
  RSS
Hawwwran
(@hawwwran)
Estimable Member
Posted by: @clemens-m

@hawwwran

Where is your daily update? 😉

Best regards, Clemens Mödlin

You can expect it every morning Prusa-Research-time. I'm from Czechia.

Posted : 17/02/2020 9:33 pm
clemens.m
(@clemens-m)
Estimable Member

@hawwwran

Thank you - I will do so,

best regards, Clemens Mödlin

Posted : 17/02/2020 9:45 pm
MileHigh3Der
(@milehigh3der)
Trusted Member

I’m in the top five oldest 14Oct orders that hasn’t been shipped....  with about 50% shipped, I was in the first 10%...

uncool

Posted : 17/02/2020 10:22 pm
clemens.m
(@clemens-m)
Estimable Member

@milehigh3der

Two weeks ago (seeing that weeks will pass till the printer arrives me) I decided to built my own Prusa clone. I have a lot of parts for the printer at home as my Prusa i3 MK2S evolved to a MK2.5S - so I ordered a few parts - last package arrived today. Will see if my clone if finished before the MINI arrives.

(Hope dies last - but it dies 😉 )

Best regards, Clemens Mödlin

Posted : 17/02/2020 10:34 pm
charles.h13
(@charles-h13)
Noble Member

@milehigh3der

Maybe you ticked them off on the forum. -  Just kidding.  

Posted : 17/02/2020 11:00 pm
k9bub
(@k9bub)
Estimable Member

Well PRUSA is Great! 2 hours after I received the mini the missing feet arrived in a separate package! So now I can put them on and print!

 

As for firmware should I use the 4.0.1 or the RC firmware?

 

Here are some pics and the printout from the printer tests they did:

      

 

 

Posted : 17/02/2020 11:47 pm
k7zpj
(@bruce-p4)
Estimable Member

@k9bub

Congratulations on getting the printer.   

I would use 4.01 to make sure the printer is working right on the released firmware.

That way if something goes wrong with the rc version, like the hot end trying to burrow to the center of the earth, you are in a bit better position with support.

Once you know it is printing perfectly then you can try the rc version.

Posted : 18/02/2020 12:03 am
k9bub
(@k9bub)
Estimable Member
Posted by: @bruce-p4

@k9bub

Congratulations on getting the printer.   

I would use 4.01 to make sure the printer is working right on the released firmware.

That way if something goes wrong with the rc version, like the hot end trying to burrow to the center of the earth, you are in a bit better position with support.

Once you know it is printing perfectly then you can try the rc version.

Thanks Bruce!

Posted : 18/02/2020 12:08 am
crawlerin
(@crawlerin)
Reputable Member

@hawwwran

Prusa-Research-Time? Is that a special timezone with broken time-space continuum, where time flows differently than everywhere else in the world, and each week gets delayed by another week? 😆

Posted : 18/02/2020 12:41 am
clemens.m liked
bobstro
(@bobstro)
Famed Member

Listen guys, they're working so hard they're over-drawing the primary grid feed off Betelgeuse. If they push too hard, things might go bad. 

My notes and disclaimers on 3D printing and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan...
Posted : 18/02/2020 3:11 am
Hawwwran
(@hawwwran)
Estimable Member
Posted by: @crawlerin

@hawwwran

Prusa-Research-Time? Is that a special timezone with broken time-space continuum, where time flows differently than everywhere else in the world, and each week gets delayed by another week? 😆

That was missleading right? 😀

Posted : 18/02/2020 5:59 am
Hawwwran
(@hawwwran)
Estimable Member

There were eight orders marked as shipped in our spreadsheet yesterday.

Posted : 18/02/2020 6:00 am
tischan
(@tischan)
Active Member

First post for me, but with a nice update. My mini shipped today this morning. A 14th oct order with some extra spools of filament that I added. 

Should arrive on friday. 

 

 

 

Posted : 18/02/2020 7:23 am
charles.h13
(@charles-h13)
Noble Member

@crawlerin

You should not post that.  You are violating the prime directive.  

Posted : 18/02/2020 12:58 pm
Frankincell
(@frankincell)
Estimable Member

@bobstro

Good to hear Prusa is pushing the limit to get those printers shipped...   I was wondering what was causing Betelgeuse to dim like that...    😉

 

All your filament are belong to us!...
Posted : 18/02/2020 1:22 pm
alex.k7
(@alex-k7)
Active Member

Hello,

I ordered my Mini on the 12th of Octobre 2019. My Mini arrived Friday the 7th of February 2020. 

After assembling it together I did the firmware update from the USB-Key and started some testprints. The included Prusa-Filament clogged the nozzle after my first print. 

I had no clogged nozzle on my MK3S with the 0,4 NozzleX from e3d (UK) for more than one year and my MK3S is running 247. 

The testprints with original 0,4 Nozzle are great (from USB-Key).

In PrusaSlicer 2.1.1 (newest Version now) I can´t include my Mini because it isn´t available. I´ve ordered a NozzleX for the Mini (0,25). I can not test it, because i can not slice for the Mini. The technical support couldn´t help. They told i have to install a Beta Version. But I can´t because my MK3S must run stable. I use it for work at school with children. I won´t do experiments with Beta-Software. 

Now i have the Mini but i can´t use it. I hope Prusa will release a newer Prusa-Slicer soon (no Beta). 

bye

Alex

This post was modified 1 month ago by alex.k7
...
Posted : 18/02/2020 3:18 pm
Bill Plein
(@billplein)
Active Member

I know we've been waiting for the Prusa Mini for a while, but this is ridiculous (see last post date)

Austin, Texas, USA...
Posted : 18/02/2020 4:28 pm
burtronix liked
Frankincell
(@frankincell)
Estimable Member

@billplein

LOL, I've noticed a couple of posts that have date issues...  Probably a Earth-time to Prusa-time translation error.

All your filament are belong to us!...
Posted : 18/02/2020 4:31 pm
Bill Plein
(@billplein)
Active Member

@frankincell

Prusa is so far ahead of everyone else, that in comparison, things just look that old.

Austin, Texas, USA...
Posted : 18/02/2020 4:32 pm
charles.h13
(@charles-h13)
Noble Member

@billplein

LOL.  Yup that is a date issue.  I ordered when I was 2?

Posted : 18/02/2020 4:51 pm
Page 109 / 146
Share:

Please Login or Register