Successful printing with Ninjaflex on Prusa Mini  

  RSS
andrew.b
(@andrew-b)
New Member

Just thought I'd let you all know that printing with Ninjaflex on a Prusa Mini is definitely possible. 🙂

In fact I'm printing with it right now. More details on my blog.

https://keen101.wordpress.com/2020/05/16/prusa-mini-first-prints-with-ninjaflex/

...
Posted : 31/05/2020 4:35 pm
andrew.b
(@andrew-b)
New Member

...
Posted : 31/05/2020 4:44 pm
fbrodziak liked
Area51
(@area51)
Honorable Member

Have tried NinjaFlex on the Mini with success using the Filatech FilaFlex40 profile.

If there is too many retractions/stops, the filament starts under-extruding. I think the filament starts softening in the extruder cooling part and stops feeding properly through the bowden.
The same model works great with a harder filament like FilaFlex40 or 92A.

Models with long extrusions and few start/stops gives the best result.

Have a look at my designs on Thingiverse or on PrusaPrinters ;)...
Posted : 01/06/2020 1:50 am
Share:

Please Login or Register