Spring Steel Sheet With Smooth PEI for Prusa Mini - any replacements?
 
Notifications
Clear all

Spring Steel Sheet With Smooth PEI for Prusa Mini - any replacements?  

  RSS
Mike Jeffries
(@mike-jeffries)
Active Member
Spring Steel Sheet With Smooth PEI for Prusa Mini - any replacements?

Hi Guys!

I am looking to buy a replacement Spring Steel Sheet with Smooth PEI for the Prusa Mini but it's out of stock.

Does anyone know of a 3rd party one that would fit well? Everything I see out there is meant for larger sizes like the MK2.5 or mk3, etc.

 

Posted : 25/05/2020 1:05 pm
Oxygen
(@oxygen)
Reputable Member
RE: Spring Steel Sheet With Smooth PEI for Prusa Mini - any replacements?

There is an other thread that covered the same topic, bottom line -- in the far east there are manufacturers that sell PEI sheets (1 side) that fit the Mini perfect but as said 1 side only.

Mini with FW:4.3.1 + SuperPINDA + Bondtech Heatbreak + PC4-M8 couplers + 1 piece boden...
Posted : 25/05/2020 1:07 pm
Mike Jeffries
(@mike-jeffries)
Active Member
Topic starter answered:
RE: Spring Steel Sheet With Smooth PEI for Prusa Mini - any replacements?

@oxygen

I was looking on aliexpress and alibaba but i dont think i saw any there. i'll look around some more. Thank you for that!

Posted : 25/05/2020 1:20 pm
Oxygen
(@oxygen)
Reputable Member
RE: Spring Steel Sheet With Smooth PEI for Prusa Mini - any replacements?

you did not look hard enough:

first hit :

https://www.aliexpress.com/item/4000983715866.html?spm=a2g0o.productlist.0.0.2b9d1c8bOXMdpb&algo_pvid=8c6da9e4-fb60-45ef-9969-83e977f4dac9&algo_expid=8c6da9e4-fb60-45ef-9969-83e977f4dac9-0&btsid=0ab6fa7b15904135209293678e23b0&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

 

 

Mini with FW:4.3.1 + SuperPINDA + Bondtech Heatbreak + PC4-M8 couplers + 1 piece boden...
Posted : 25/05/2020 1:34 pm
Mike Jeffries
(@mike-jeffries)
Active Member
Topic starter answered:
RE: Spring Steel Sheet With Smooth PEI for Prusa Mini - any replacements?

@oxygen

I did look - its TEXTURED - not smooth.

Posted : 25/05/2020 1:35 pm
cwbullet
(@cwbullet)
Illustrious Member
RE: Spring Steel Sheet With Smooth PEI for Prusa Mini - any replacements?

@michaelroitman

I am also waiting for another smooth and blank steel option.  

--------------------
Chuck H
3D Printer Review Blog...
Posted : 25/05/2020 1:52 pm
Gordon W
(@gordon-w)
Reputable Member
RE: Spring Steel Sheet With Smooth PEI for Prusa Mini - any replacements?

Prusa has a smooth powder coated sheet on the way (   at about 44:15)

Posted : 25/05/2020 4:08 pm
Framemanager
(@framemanager)
Prominent Member
RE: Spring Steel Sheet With Smooth PEI for Prusa Mini - any replacements?

It's new very good quality ! Smooth AND textured !

Energtic 3d store

I have it for my MK3 and the 5 other printers, nothing to say except that it is even more efficient than Prusa ...

Prusa I3 MK3 (THE best) - Ender 3 - Anycubic Mega S - CR-10s PRO - Prusa Mini - Clone MK3S bear à monter......
Posted : 27/05/2020 11:49 pm
Share: