Notifications
Clear all

Spool Holder  

  RSS
krcm0209
(@krcm0209)
Membre
Spool Holder

Does the mini come with anything meant to help with holding a spool of filament? Will people buying this as their first 3d printer need to make something to hold their spool? The MK series printers come with the pieces to hold a spool on the printer frame, but obviously that doesn't seem like a good solution here.

Publié : 29/10/2019 8:56 pm
MarcinS
(@marcins)
Eminent Member
RE: Spool Holder

As far as I am aware, from another post I saw somewhere that I can't find now, the desktop spool holder you see in the videos (low profile thing with some bearings that the spool sits on top of) is what will ship with the MINI.

It's very briefly in the launch video:

Ce message a été modifié il y a 5 years 2 fois par MarcinS
Publié : 29/10/2019 11:52 pm
Crawlerin
(@crawlerin)
Prominent Member
RE: Spool Holder

Yes, basic holder that sits on a table will be included, at least according to reveal video and IIRC it had also been confirmed by somebody from company on this very forum.

Worst case you will hold filament by yourself while you print one of bajillion spool holder STLs from the internet 🙂 

Publié : 30/10/2019 12:27 am
moojuiceuk
(@moojuiceuk)
Trusted Member
RE: Spool Holder


1 min 19secs into that video....

An adjustable width bearing based spool holder. Neat little design by the looks of it.

Publié : 30/10/2019 12:31 am
cwbullet
(@cwbullet)
Membre
RE: Spool Holder

I like the design.  I have had issues with several of the ones I made hanging.  

--------------------
Chuck H
3D Printer Review Blog

Publié : 30/10/2019 3:10 am
Oxygen
(@oxygen)
Reputable Member
RE: Spool Holder

they look like these -- with extra spacers in them

Mini with FW:4.4.1 + SuperPINDA + Bondtech Heatbreak + PC4-M8 couplers + 1 piece boden

Publié : 30/10/2019 11:58 am
Oxygen
(@oxygen)
Reputable Member
RE: Spool Holder

while browsing the prusaprinters database of projects i found that the above product looks looks like this https://www.prusaprinters.org/prints/7510-universal-spool-holder

Mini with FW:4.4.1 + SuperPINDA + Bondtech Heatbreak + PC4-M8 couplers + 1 piece boden

Publié : 30/10/2019 1:11 pm
M8Harry
(@m8harry)
Trusted Member
RE: Spool Holder

I got an email from Prusa Support a while back

 

"

Hi Travis,

 

Yes, it does come with a spool holder. Unlike on MK3S, the one for MINI is not attached to the frame. You can see it in this video here:

 

 

Please let me know if you have any more questions 🙂

 

Hope you have a great day!

 

______________

Best regards,

Marcin Mączewski

Customer Support"

Respect the fact everyone is entitled to have an opinion, you dont have to like it or hate it, just accept its theirs and not yours and you will be ok!

Publié : 31/10/2019 5:11 pm
MarcinS
(@marcins)
Eminent Member
RE: Spool Holder

Anyone know if there's an STL available for the MINI spool holder? Want one for use with my MK3S and LACK enclosure. It seems to have a neat adjustment system based on what I've seen in the MINI manual.

Publié : 11/12/2019 3:47 am
Greybeard3D
(@greybeard3d)
Estimable Member
RE: Spool Holder

The spool holder is clearly shown in the assembly manual. 

Publié : 11/12/2019 6:02 am
MarcinS
(@marcins)
Eminent Member
RE: Spool Holder
Posted by: @phr0ze

The spool holder is clearly shown in the assembly manual. 

Yes, that's what I said.

Do you mean that I should just use that as a reference to design my own? I hoped that Prusa would have open sourced it already to save me the time!

(For what it's worth I have a similar one I found on Thingverse, but this one seems a little nicer and I haven't seen one exactly like it)

Publié : 11/12/2019 6:28 am
MarcinS
(@marcins)
Eminent Member
RE: Spool Holder

Looks like my question was indirectly answered over on the Wait Thread (via Twitter). Printed part STLs dropping later this week, hopefully that includes the spool holder:

https://twitter.com/captfoss/status/1204478631797506048

Publié : 11/12/2019 8:59 am
Neophyl
(@neophyl)
Illustrious Member
RE: Spool Holder

There are about a hundred variations on this design over on thingiverse and have been for years.

Publié : 11/12/2019 2:40 pm
Lichtjaeger
(@lichtjaeger)
Noble Member
RE: Spool Holder
Posted by: @marcins

Anyone know if there's an STL available for the MINI spool holder? Want one for use with my MK3S and LACK enclosure. It seems to have a neat adjustment system based on what I've seen in the MINI manual.

Now available on Github.

Publié : 11/12/2019 3:01 pm
HarryP et Syd ont aimé
Fred
 Fred
(@fred-2)
Active Member
Lichtjaeger
(@lichtjaeger)
Noble Member
RE: Spool Holder

@fred-bouchard

They all will work. Even the cheapest ones.

Publié : 29/07/2020 7:34 pm
Fred a aimé
Partager :